VEVOR Paintless Dent Repair Kit 117-Piece — 2-in-1 Slide Hammer, Adjustable Lifters for Hail, Door Dings

The VEVOR 117-piece paintless dent repair kit is a complete, adjustable toolset for removing car body dents, hail damage, and door dings without harming original paint.

This comprehensive kit bundles adjustable lifters, a 2-in-1 slide hammer, a bridge puller, multiple suction cups, 50 solid glue tabs, a hot glue gun with glue sticks, and a selection of finishing tools in a padded storage bag. Designed for DIYers and small body shops, the set is built to tackle dents from tiny dings up to larger shallow deformations across most metal panels while minimizing surface abrasion and leftover adhesive.

How does the kit lift different dent sizes?

The golden dent lifter and the bridge puller each have adjustable spans so you can tailor the tool to the dent’s width and depth. The slide hammer converts between short and long pull configurations to deliver controlled force for stubborn dents.

• Golden lifter adjusts for dents roughly 0.2" to 5.3" wide.
• Bridge puller adjusts to handle dents starting about 0.2" up to 3.54".
• 2-in-1 slide hammer swaps between short and long pulls for varied leverage.
• Suction cups and tap-down pens assist with edge and shallow repairs.

Will using this kit damage my car’s factory paint?

The kit is designed to preserve factory finishes: the lifter and bridge puller contact surfaces are finished with soft materials to reduce abrasion, and the included glue formulation is strong yet removable. Proper technique — cleaning the area, using the correct tab size, and following the removal steps — limits risk of paint lifting or scratches.

• Soft-bottom lifter and bridge feet to avoid direct metal-on-paint contact.
• Solid glue tabs with strong adhesion that peel clean when heated and scraped.
• Alcohol spray and scraper recommended for safe glue residue removal.
• Video tutorials and electronic manual guide proper procedure.

What accessories are included and how do they speed repairs?

The set supplies a wide range of tabs, glue sticks, and finishing tools that let you match the repair method to the dent. The hot glue gun, multiple tab shapes and sizes, air wedge, and tap-down pens enable fast setup, firm pull points, and subtle finishing for a smooth surface.

• 50 solid puller tabs plus 6 bridge-specific tabs for varied shapes and sizes.
• 20 hot-melt glue sticks and a glue gun for rapid tab attachment.
• Air wedge, suction cups, plastic shovel, rubber hammer, and tap-down pens for positioning and finishing.
• Tool bag and reflective board for organized work and better visual detection of dents.

How do I remove glue and finish the area after pulling?

After pulling, allow the tab to cool slightly, then spray the glue joint with alcohol and use the provided scraper to lift the tab and residue. Tap-down pens and the rubber hammer can flatten any raised edges, and the cloth and bottle help clean and polish the surface for a tidy result.

• Spray alcohol on the tab area to dissolve adhesive for safe removal.
• Use the plastic scraper to lift residual glue without scratching paint.
• Tap-down pens and rubber hammer smooth remaining high spots.
• Final wipe with cloth restores surface cleanliness and sheen.

Who is this for: The VEVOR 117 PCS kit suits homeowners, automotive hobbyists, mobile detailers, and small repair shops that want a paintless approach to common dents. It’s ideal for anyone who needs a versatile, portable set of tools to handle hail damage, door dings, and minor automotive panel imperfections while minimizing the need for filler or repainting. If you’re new to PDR, follow the included video tutorials and start with smaller dents to build confidence before moving to larger repairs.