waltyotur 12" Hitch Receiver Extension 2" Receiver, 5/8" Pin Hole — 12in Reach, 500 lb Tongue Load

waltyotur's 12-inch hitch receiver extension is a steel adapter that adds 12 inches of clearance between your vehicle's 2" receiver and the mounted accessory, using a 5/8" pin hole for secure attachment.

This hitch extension (model 84433) provides extra reach for bike racks, cargo carriers and other rear-mounted accessories when clearance is limited. Constructed from carbon steel with a durable black powder coat, it slips into a standard 2" receiver and secures with a 5/8" pin. The component is designed for repeated use on common tow setups; however, always confirm your vehicle and hitch ratings before towing heavy loads.

How will this extension help when my bike rack won't clear the bumper?

The extension increases the distance between your receiver and the accessory, keeping bikes or cargo away from bumpers and rear sensors. That extra 12 inches reduces risk of contact and improves airflow around mounted items.

• 12-inch pin-to-pin span to shift accessories rearward
• 2" receiver size fits most common hitch openings
• 5/8" pin hole compatible with standard hitch pins and locks
• Ideal for clearing doors, sensors, or spare tires

Is this extension strong enough for my cargo carrier or rack?

The extension is built from carbon steel and finished in black powder coat for corrosion resistance and repeated use. It is rated for a 500 lb maximum tongue load; for gross trailer weight or towing, check the vehicle and original hitch rating before use.

• All-carbon-steel construction for structural strength
• Black powder coat to resist rust and abrasion
• Rated 500 lb maximum tongue load (verify vehicle/hitch limits)
• Not supplied with instructions—basic install is slide-and-pin

Will the fit be tight and rattle-free on my vehicle?

The extension fits into a standard 2" receiver and uses a 5/8" pin hole for attachment; small play can occur depending on the vehicle receiver and accessory shank tolerances. For the firmest installation, use a hitch tightener or anti-rattle device (recommended) and a quality pin or lock.

• Designed for standard 2" receivers and 5/8" pins
• May benefit from a hitch tightener or anti-rattle clamp
• Works with many bike racks and cargo carriers—confirm shank fit
• Simple slide-in installation with compatible pin/clip or lock

What should I watch for during installation and use?

Installation requires sliding the extension into the 2" receiver and securing it with a compatible 5/8" pin and clip or lock (not included). Regularly check fasteners and the powder coat for chips; keep the assembly clean and inspect for wear if used frequently.

• Use a 5/8" hitch pin or lock rated for your application
• Re-torque or re-check connection periodically on long trips
• Avoid exceeding the 500 lb tongue load rating
• Do not assume gross towing capacity—refer to vehicle and hitch manufacturer

Who is this for: The waltyotur 12-inch hitch receiver extension suits drivers who need extra rear clearance for bike racks, cargo carriers, or rear accessories and who have a standard 2" receiver. It's aimed at DIY vehicle owners, weekend cyclists, and anyone who wants a durable, low-profile way to move an accessory farther from the tailgate or bumper. If you plan to carry heavy loads or tow trailers, verify the extension's tongue load rating alongside your vehicle’s and hitch's published limits.