Wizards Turbo Cut Rubbing Compound, 32 oz — Heavy‑cut, Time‑Release Paint & Gelcoat Correction

Wizards Turbo Cut is a 32 oz heavy-cut, time-release rubbing compound designed to remove deep paint defects and level surfaces to a refined 4000-grit finish without residue.

Built for professional detailers and serious enthusiasts, Turbo Cut combines an aggressive initial abrasion with a self-moderating abrasive matrix so you get fast removal of sanding marks, oxidation and heavy swirls while avoiding pad loading and hazing. The water-based, silicone- and wax-free formula cleans up easily and prepares paint or gelcoat for subsequent polishing and protection steps. Use it by machine or by hand across automotive and marine surfaces for controlled, repeatable correction.

How does Turbo Cut actually remove deep scratches and sanding marks?

Turbo Cut uses a time-release abrasive system that begins aggressively to break down and lift deep defects, then gradually becomes finer as you work the panel. That progressive action lets you cut quickly without over-abrading the surrounding paint, producing a leveled surface similar to a 4000-grit finish.

• Starts with an aggressive cut to attack 1200-grit and finer sanding marks.
• Abrasives self-moderate with continued polishing to reduce micro-marring.
• Leaves a surface ready for finish polish—minimal haze or compound residue.

Can I use this compound with a machine polisher and what are the best settings?

Yes—Turbo Cut is engineered for machine application and also works by hand if needed. For fastest, most consistent correction use a dual-action or rotary polisher with a blended wool cutting pad at recommended speeds to optimize removal while minimizing heat buildup.

• Recommended RPM range: 1400–2200 with a blended wool pad.
• Use moderate overlapping passes and light-to-medium pressure for control.
• Follow with Finish Cut and a finishing pad for gloss restoration.

Is Turbo Cut suitable for both automotive paint and marine gelcoat?

Turbo Cut is formulated to work on fresh and aged single-stage paints, modern clearcoats, and gelcoat or fiberglass found on boats. Its heavy-cut capability makes it a versatile compound for vehicles and marine craft that need aggressive defect removal before refinishing or protection.

• Removes exterior defects on cars, trucks, and neglected fiberglass surfaces.
• Handles marine gelcoat sanding marks and oxidation effectively.
• Non-greasy, water-based formula simplifies clean-up on multiple substrates.

How does the formula affect cleanup and prep for next steps?

Because the compound is water-based and free of silicone and wax, it rinses and wipes clean without leaving contaminating residues that interfere with subsequent polishes or coatings. That makes the surface ready for a finer finish step or application of sealants and ceramic coatings with minimal extra preparation.

• Silicone- and wax-free for true, residue-free paint prep.
• Wipes and rinses clean from pads and towels—no staining.
• Leaves paint surface prepared for finishing polish or protective products.

Who this is for: Wizards Turbo Cut is aimed at professional detailers, body-shop technicians, restoration specialists and experienced DIYers who need a dependable heavy-cut compound for aggressive paint correction. If you work on cars, trucks or boats and require a product that removes deep sanding marks, oxidation and heavy defects while rinsing clean and staging the surface for a show-quality finish, Turbo Cut is built to be the correction step in a disciplined multi-stage workflow.