X-BULL 4500 lb Electric Winch 12V — 50 ft Synthetic Rope, Wireless Remote, IP66

The X-BULL 4500 lbs 12V electric winch kit is a heavy-duty ATV/UTV recovery and utility winch equipped with a 50 ft synthetic rope, wireless remote, and IP66 waterproof housing for reliable field performance.

Built to handle tough outdoor tasks, this X-BULL winch combines a high-torque 1.5 HP motor with a three-stage planetary geartrain to deliver a 4500 lb pulling capacity. It arrives as a complete kit: fairlead, mounting bracket, anti-corrosion hardware, a 50-foot synthetic rope with protective sleeve, a wireless remote and handlebar rocker switch. The unit’s powder-coated exterior and IP66 rating help resist the elements while the compact mounting footprint fits many popular side-by-sides and utility vehicles.

How much pulling power and speed does the X-BULL 4500 provide?

This winch is rated for up to 4,500 pounds thanks to a robust 1.5 horsepower motor and a 136:1 three-stage planetary gearset. It balances line speed and control with a no-load speed up to 20.5 ft/min and a full-load speed around 8.6 ft/min, plus an integrated dynamic brake to hold loads securely.

• Rated capacity: 4,500 lbs (single-line rating)
• Motor: 1.5 HP high-torque 12V motor
• Gear ratio: 136:1 three-stage planetary gearbox
• Speeds: ~20.5 ft/min no-load, ~8.6 ft/min full-load
• Brake: dynamic holding brake to prevent drift under load

What accessories and controls come with the kit?

The kit includes a full set of installation and control components so you can mount and operate the winch right away. Wireless and wired controls give flexibility for remote recovery or on-vehicle operation, while the roller fairlead protects the line during pulls.

• Wireless remote with approximately 82 ft range for remote operation
• 8-inch handlebar mini rocker switch for on-vehicle control
• Roller fairlead included to reduce rope wear
• Mounting bracket with a 3 x 6.6 in bolt pattern and anti-corrosion hardware

What rope, protection, and weather resistance does it offer?

Instead of steel cable, this model uses a lightweight, flexible 1/4 in x 50 ft synthetic rope and a 3.2 ft protective sleeve to extend rope life. The winch’s housing is powder coated and rated IP66, helping prevent dust ingress and powerful water jets from disrupting operation in wet conditions.

• Rope: 50 ft synthetic rope, 1/4 inch diameter for easy handling
• Rope sleeve: 3.2 ft protection for abrasion-prone sections
• Housing: powder coated finish to resist corrosion
• Water resistance: IP66-rated for dust-tight and strong water-jet protection

How easy is installation and which vehicles will it fit?

The winch arrives with a compact mounting bracket and common bolt pattern to simplify fitting to many ATV/UTV platforms and cargo boxes. The bracket dimensions and mounting holes match popular utility models; still, verify fit against your vehicle’s plate before installation.

• Bracket size: 5.9 x 5.1 x 4.9 inches for compact mounting
• Bolt pattern: 3 x 6.6 inches to match common mounts
• Mounting hardware: anti-corrosion bolts and fasteners included
• Compatibility: designed for many SxS, UTV, and ATV models (check specific fitments)

Who is this for? The X-BULL 4500 lb winch is aimed at owners of ATVs and UTVs who need a durable, easy-to-install recovery and utility solution — from farmers and landowners to hunters, trail riders, and small work crews. Choose this model if you want a powerful 12V winch with synthetic rope handling, remote operation, and weather-resistant construction for routine recoveries, light towing tasks, and general property maintenance.