XtraGlow Smoked Halo Tail Lights 2-Pack LED Square Rear Combination for 1976–2006 Wrangler/CJ – Brake, Turn, Reverse

XtraGlow smoked Halo square rear tail lights are a bolt-in LED replacement that updates Wrangler and CJ models from 1976–2006 with smoked lenses, multi-function LEDs, and driver/passenger side marker lights.

These square rear combination lamps from XtraGlow blend modern LED performance with a retro square housing designed to fit classic Jeep models. They provide brake, turn, tail, reverse and license illumination via dedicated LEDs, and include side marker lights for both sides. Because they replace older incandescent assemblies, some wiring changes and minor cutting/splicing are required during installation; this kit is not a plug-and-play swap for all vehicles.

What lights and LEDs are built into this assembly?

Each assembly integrates separate LED groups to handle common rear functions so you get bright, clear signals and improved visibility over incandescent bulbs. The kit focuses on high-output LEDs arranged for each role.

• 32 red Halo LEDs for braking, parking and directional signaling.
• 18 white LEDs dedicated to reverse/back-up light output.
• 6 LEDs illuminating the license plate area for legal visibility.
• 3 side reflector/marker LEDs and integrated smoked lens styling.

Will these fit my Jeep, and what modifications are needed?

The housings are sized for many Jeep Wrangler and CJ years but check fitment numbers and mounting spacing before ordering. This is generally a bolt-in replacement with some wiring work required.

• Compatible model ranges: 1997–2006 Wrangler, 1976–1986 CJ7, 1981–1985 CJ8, 1987–1995 Wrangler YJ, 1976–1983 CJ5.
• Bolt spacing roughly 2 inches; verify against your vehicle before install.
• Not fully plug-and-play—cut the stock tail lamp pigtail and splice to the new harness using supplied hardware.
• Reference replacement numbers (left/right) included for cross-checking fit.

How do I wire these LEDs and avoid hyper-flash or error codes?

The assembly uses a four-wire configuration; matching these to your vehicle harness is essential for correct operation. Vehicles with older incandescent circuits may need additional components to prevent fast flashing or electrical faults.

• Wire color functions: white = ground, blue = reverse/back-up, black = tail/license/marker, red = stop/turn/brake.
• Confirm your vehicle’s stock color codes before splicing—colors can vary by year and aftermarket modifications.
• If you get rapid turn-signal flashing on some older vehicles, add load resistors (not included) or an LED-compatible flasher.
• Use quality connectors and seal any splices to protect against moisture and corrosion.

How do these tail lights change the look and functionality of my Jeep?

Beyond brighter, longer-lasting LEDs, the smoked lens offers a contemporary, low-profile look while preserving required signaling. The result is a modernized rear end that keeps factory-style square lines.

• Smoked lens for a stealthy, updated appearance without changing body lines.
• Distinct Halo ring effect adds visual separation between tail and signal zones.
• White reverse LEDs and license LEDs improve night backing and plate illumination.
• Durable LED arrays reduce maintenance versus incandescent bulbs.

Who is this for? Enthusiasts restoring or upgrading older Jeep Wrangler and CJ models who want improved lighting performance and a modern smoked aesthetic will appreciate these XtraGlow assemblies. They suit owners comfortable with basic vehicle wiring and minor body-hardware work, and those who are prepared to add resistors if their vehicle’s stock electrical system requires load balancing. If you need a true plug-and-play swap with zero wiring changes, consider confirming fitment with your mechanic or choosing an assembly specifically listed as plug-and-play.