Xuhal LED Load Resistor Kit 50W 6Ω — 60-Pack Gold with 40 T-Tap Connectors, Fixes Hyper-Flash

This kit contains 20 alloy-bodied 50 watt, 6 ohm load resistors and 40 T-tap wire connectors, enough to handle multiple LED bulbs or for sharing between vehicles. The resistors are designed to be wired in parallel with LED turn signal circuits to simulate the electrical load of incandescent bulbs, helping to stabilize flash rates and clear dash bulb-failure warnings on many cars and motorcycles. Each resistor is compact yet generates heat during operation, so proper mounting on a metal surface is recommended for safe use.

How will these resistors affect my LED turn signals?

Installing a Xuhal 50W 6Ω resistor in parallel with an LED turn signal increases the circuit's electrical load to more closely match the original incandescent bulb. That extra load reduces rapid flashing (hyper-flash) and can eliminate false bulb-out indicators on the dashboard. Resistive loads are a widely used, vehicle-agnostic way to restore expected behavior without modifying the vehicle's flasher unit.

• Adds 50W/6Ω load per resistor to the signal circuit
• Taps in parallel with the LED lamp, not inline with it
• Helps correct hyper-flashing and error messages on many vehicles
• Works with turn signals, parking lights, running lights, license lights

How do I install a Xuhal resistor safely?

Installation is straightforward: attach one resistor lead to the positive signal wire and the other lead to a good ground, then secure the resistor to a metal surface to dissipate heat. The kit includes T-tap connectors to make wiring neater and faster without cutting main harness wires. Always disconnect the battery before wiring, test the signal before finalizing, and keep the resistor away from plastic or rubber parts.

• Use one resistor per LED bulb unless vehicle wiring dictates otherwise
• Mount on unpainted metal or a heat-sinking bracket to avoid melting nearby parts
• Use the included T-tap connectors for quick splicing into factory wires
• Confirm polarity and test signals before securing everything

Will these resistors work with my car or motorcycle?

These resistors are universal electrical components designed for 12V vehicle systems; compatibility depends on the vehicle's flasher and bulb circuits rather than make or model. Many modern cars that detect bulb load through low-resistance sensing will respond correctly once a proper resistor is fitted. If a vehicle uses CAN-bus or smart flasher modules that require CAN-compatible resistors, consult the vehicle manual or an electrician first.

• Designed for standard 12V systems common in cars and motorcycles
• Effective for most setups that detect bulb load via resistance/current
• Not a CAN-bus electronic module — check CAN-vehicles before use
• Works best when mounted to metal to manage heat safely

Who is this for? The Xuhal 50W 6Ω kit suits DIYers, mechanics, and fleet owners who retrofit LED bulbs and need a reliable, low-cost method to stop hyper-flashing or dash warning lights. It’s ideal for people who want a durable alloy resistor that’s easy to install with included T-tap connectors and enough quantity for multiple vehicles or spare parts storage. If you plan to install LEDs across several signal points—or want extra connectors for clean splices—this 20-resistor, 40-connector kit offers practical value. Remember to mount resistors on metal and keep out of reach of children to avoid heat or choking hazards.