Exhaust & Emissions Parts

Reejim's 2.5-inch high-flow catalytic converter is a compact, stainless steel 200-cell metallic unit engineered to improve exhaust flow while meeting Federal EPA emissions requirements (not legal in California). This catalytic converter combines a compact footprint with a durable spun stainless steel housing and a...

The A-Premium Vapor Canister Purge Solenoid Valve is a direct-fit EVAP purge valve designed to replace OEM units on select Toyota Corolla and Lexus models, restoring correct fuel-vapor flow control and engine management performance. When the vehicle’s evaporative emissions system isn’t venting properly, the...

LCGP 4 Inch Straight Exhaust Pipe is a 30-inch stainless steel straight muffler replacement tube with 4" inlet/outlet and two included lap joint band clamps for bolt-on or weld installation. This stainless steel mandrel-bent exhaust tube is built as a universal replacement option for...

A-Premium Secondary Air Injection Pump (smog pump) is a direct-fit replacement pump engineered to restore secondary-air function and reduce exhaust emissions on compatible Mercedes‑Benz models. When the secondary air injection (SAI) pump fails, you'll see check-engine lights, rough cold starts, and failed emissions tests....

Walker SoundFX 18568 is a direct-fit aluminized-steel replacement muffler with 2.25" inlet and outlet designed to restore factory-style exhaust sound and long service life for compatible Jeep Cherokee models. This muffler is a bolt-on replacement built to match original exhaust routing and hangers while...

Toplamper's 4 to 6 Inch Chrome-Plated Exhaust Elbow Tip is a 23-inch, clamp-on turndown designed to slide over a 4" OD tailpipe and finish your truck's exhaust with a polished 135° side-exit look. This clamp-on exhaust elbow adapts a 4" outside-diameter tailpipe to a...

Drynochet’s 3" 304 stainless steel resonator muffler reduces exhaust drone while preserving a deep, aggressive tone for performance vehicles. Built from marine-grade 304 stainless steel with polished welds and a straight-through perforated core, this compact resonator is engineered to tame harsh cabin frequencies without...

AITKEN EVAP Vapor Leak Detection Pump is a direct-fit replacement part that restores your vehicle’s evaporative system leak detection and helps maintain proper fuel-vapor pressure. This replacement Vapor Leak Detection Pump from AITKEN is built to match OEM fit and function for many BMW,...

The A-Premium Vapor Canister Purge Solenoid Valve is a direct-fit replacement EVAP purge valve engineered to restore proper vapor purge operation on compatible Ford and Lincoln V8/V6 engines. This replacement purge solenoid valve controls the flow of fuel vapors from the charcoal canister to...

STMGW 90 Degree Exhaust Pipe Elbow is a mandrel-bent, aluminized steel 4" diameter elbow with a 10" arm and flared/slotted end for easy, customizable exhaust routing and welding. This 90° exhaust elbow by STMGW is built for universal fit applications where a durable, smooth-flowing...

Walker Heavy Duty 41640 Exhaust Elbow is a 5" inlet (OD) by 5" outlet (ID) aluminized-steel elbow designed to connect exhaust pipes at the correct angle for improved routing and reliable aftermarket fit. Built by Walker — a global supplier to OE and aftermarket...

Complete crankcase ventilation replacement kit engineered to restore correct PCV function on 2006–2007 BMW N52 engines, including oil separator, return hoses, and pressure-regulating valve for a direct-fit repair. If your 2006–2007 BMW with the 3.0L N52 engine is showing rough idle, elevated oil consumption,...

A-Premium's 2-blade secondary air injection (smog) pump is a direct-fit replacement designed to restore proper secondary-air flow and reduce exhaust emissions on Toyota Tacoma 2005–2015 2.7L L4 engines. This replacement pump matches factory mounting points and electrical connections for a straightforward swap. Built from...

HocvrlX 911-095 evap vapor charcoal canister is a direct-fit, OEM-equivalent replacement designed to restore proper fuel vapor capture and help clear EVAP-related fault codes on compatible Chevy, GMC, Express, Savana and Workhorse models. This replacement charcoal canister (often listed as 911-095, 911095, 12569373, or...

LCGP Dual Exhaust Tip is a polished 304 stainless steel dual-wall tailpipe with a 3" inlet, 4" outlet and 12" length that adds a clean, durable finish to compatible car and truck exhausts. This universal-style exhaust tip is built to improve the look of...

Dynomax Race Bullet 24215 is a compact, 100% welded straight-through race muffler engineered to deliver a deep racing tone with up to 4 dB of noise reduction using proprietary CRF technology. Built for track use and tight-fit installations, the Dynomax Race Bullet 24215 mixes...

The Vurkcy 4" inlet, 10" outlet exhaust tip is a bolt-on, mirror-polished stainless steel tailpipe extension that gives a sleeker look and improved drainage while fitting vehicles with 4" outside-diameter tailpipes. This stainless-steel exhaust tip combines visual polish with practical details: a slanted, rolled-edge...

The Toplamper 4 to 5 inch diesel exhaust elbow tip is a 23-inch, clamp-on, 135° chrome-plated steel turndown designed to slide over 4" outside-diameter tailpipes and provide a stylish side-exit finish without welding. Upgrade the look of your pickup’s exhaust with a long, angled...

The CILOYU 212cc left long pipe exhaust is a TIG-welded replacement muffler designed to increase exhaust flow, protect your legs with an extended routing and heat shield, and fit popular 212cc/200cc clone engines and mini bikes. If you ride or maintain small-engine vehicles like...

Yeoflagtrade’s 3-inch high-flow catalytic converter (2-pack) is a universal, EPA-compliant direct-fit replacement with an O2 sensor port designed to restore exhaust flow and reduce emissions while matching factory fitment. When your vehicle’s catalytic converter needs replacement, you want a reliable unit that balances flow,...

The Yoursme 71500 Exhaust Manifold Template Removal Tool Set is a dedicated drill-template and extractor kit made to remove broken exhaust manifold bolts from Dodge 5.7L Hemi engines without damaging the cylinder head. When stubborn, sheared, or corroded manifold studs leave you staring at...

BSTFLEX Exhaust Heat Shield Wrap is a 12" x 39" aluminum-fiberglass sheet designed to protect exhaust components and nearby parts from extreme heat while remaining flexible and easy to fit. This heavy-duty heat shield combines an embossed aluminum face with a fiberglass core to...

Ganluuree’s 16-piece exhaust hanger set includes zinc-coated 3/8" (10mm) mild-steel rods and rubber mounts to secure and reduce vibration in exhaust systems. This complete kit combines straight and 90° hanger rods with matching rubber isolators so you can repair, replace, or customize mounts on...

Design Engineering Titanium Exhaust Wrap is a 2" x 25' high-temperature header wrap made with pulverized lava rock woven into a titanium fiber construction to control exhaust heat and protect engine bay components. This exhaust wrap uses Design Engineering's Lava Rock Technology to trap...