Yoursme

The Yoursme 19mm harmonic balancer socket (model 77080) is a heavy-duty, 6-point 1/2" drive tool engineered to remove Honda 19mm hex crankshaft pulley/damper bolts quickly and with minimal slipping. If you work on Honda engines that use a 19mm hex on the crank pulley...

Yoursme 3 Pack S07020800 Category 1 draw pins are durable 5-1/2” quick-hitch securing pins designed to lock category‑1 tractor attachments safely and resist corrosion. These heavy‑duty draw pins are sized for Category 1 quick hitch systems and supplyors a simple, dependable way to fasten...

These Yoursme heavy-duty ceramic brake pads are a 2-front + 1-rear replacement set engineered to restore strong, quiet braking for Harley Davidson Touring and select models from 2000–2007. If your Electra Glide, Road King, Road Glide or other compatible Harley feels less responsive at...

High-performance front and rear ceramic-disc brake pad sets engineered to replace OEM parts on Honda Pioneer 500, 700 and 700-4 models (2014–2021) for stronger, quieter stopping and longer pad life. These Yoursme brake pads are a direct-fit replacement designed to match the factory mounting...

The Yoursme 800-409HP coolant connector is a stainless-steel heater-hose adapter (3/4in tube x 5/8in hose) designed to replace OEM plastic fittings and restore a leak-free coolant and HVAC connection. If your vehicle’s original plastic heater hose fittings have cracked, leaked, or softened with age,...

The Yoursme Crank Pulley Tool with removable pins and reinforcement ring is a dedicated timing pulley wrench kit designed to safely hold and remove Subaru crank pulleys for timing-belt and engine service. This compact kit bundles a laser-cut crank pulley tool, a reinforcement ring,...

Yoursme's 6778, 6779 injector pullers and 7222 tube remover/installers are purpose-built steel tools for safely extracting and reinstalling injectors and tubes on GM 6.6L Duramax engines (2001–2021). If you service Duramax 6.6L engines, having the correct pullers and tube tools prevents damaged cups and...

The Yoursme 71500 Exhaust Manifold Template Removal Tool Set is a dedicated drill-template and extractor kit made to remove broken exhaust manifold bolts from Dodge 5.7L Hemi engines without damaging the cylinder head. When stubborn, sheared, or corroded manifold studs leave you staring at...

Yoursme 34720 is a complete fuel injector seal installer kit built to seat Teflon injector seals for many Hitachi, Bosch, Continental and Delphi single- and double-sealed injectors used on Ford, GM and Subaru engines. This compact toolkit groups purpose-made pilot cones, seal pushers, resizers...

The Yoursme 6599 fuel tank lock ring tool is a three-pronged, heat-treated steel wrench made to remove and install fuel pump/sender lock rings quickly and without damage. If you service fuel pumps or sender units, the right removal tool saves time and prevents costly...

Yoursme Gimbal Bearing Alignment and Install Kit is a 3-piece heavy-duty tool set designed to align and install gimbal bearings and drive shaft seals on Mercruiser, Bravo, Volvo, OMC and similar sterndrives. This professional-grade kit contains three purpose-made adapters that make lining up the...

Yoursme's red aluminum kit upgrades Honda EU1000i, EU2000i and EU3000i generators with an extended-run gas cap, magnetic dipstick and no-spill oil funnel for cleaner refills and simpler maintenance. Designed specifically for Honda small inverter generators, this three-piece accessory set replaces the factory gas cap...

Complete high-pressure oil pump hose, crossover line and master service kit engineered to service Ford 7.3L Powerstroke diesel engines (1999–2003) and compatible Navistar models. This Yoursme kit bundles replacement HPOP hose lines, the crossover line, plus a master service set of seals, O-rings and...

Yoursme LS Engine Lift Plate is a CNC steel hoist bracket engineered to safely lift and position Chevy Gen III and Gen IV LS-series engines during removal and installation. Designed specifically for LS, LSX, LS1, LS2, LS3 and LQ4 family engines (including 4.8L, 5.3L,...

Yoursme LS Engine Lift Plate is a CNC steel hoist adapter engineered to safely lift and tilt Gen III and Gen IV Chevy LS/LSX engines for removal, installation, and service. Designed specifically for the LS family — including LS1, LS2, LS3, LSX and common...

Yoursme LS Swap Motor Mount Adapter Plates are CNC-milled billet aluminum brackets that let you bolt an LS-series engine into a vehicle with original small-block Chevy mounts with four adjustable positions and included hardware. If you're converting an SBC/BBC-equipped chassis to run any common...

The Yoursme Marine Steering Tube Grease Nut is a 7/8" threaded, double-O-ring grease fitting designed to lubricate, seal and protect OMC outboard hydraulic and cable steering tubes. This compact replacement part fits many OMC models (designated 2861 / FSM068) and gives a convenient grease...

The Yoursme Rocker Arm Remover Installer & Valve Spring Compressor is a dedicated specialty toolset engineered to safely remove and install rocker arms, hydraulic lash adjusters, and valve springs on 3.7L and 4.7L Chrysler, Dodge and Jeep engines. When servicing the 3.7L and 4.7L...

Yoursme's steering stabilizer tie rod clamp secures a steering stabilizer above a 1-1/2" OD aftermarket tie rod for 2007–2025 Jeep Wrangler and Gladiator models. This kit provides a bolt-in solution to relocate and retain a steering stabilizer when you swap to aftermarket tie rods...

The Yoursme 000133 torque multiplier is a dedicated tool that simplifies removal and installation of 36mm axle nuts and flywheel gland nuts on classic Volkswagen models. If you maintain or restore air-cooled Volkswagens from the 1940s through the 1970s, the right specialty tools save...

The Yoursme Trim Tilt Pin Wrench Set (MT0004, MT0006, MT0009) is a three-piece 1/2" drive tool kit made to remove and install hydraulic trim/tilt and steering end caps on Yamaha, Suzuki, Johnson, Evinrude, Honda outboards and Seastar systems without damage. This professional-grade kit combines...

The Yoursme 0033 Universal Transmission Front Pump Remover is a heavy-duty, adjustable-jaw extractor engineered to safely remove conventional front pumps from many Ford, GM and Chrysler transmissions. This professional-grade pump remover replaces Atec T-0033 and Kent-Moore J-45053, providing a robust, reusable solution for technicians...