Shocks, Struts & Suspension

KSP PERFORMANCE's forged aluminum upper control arm replaces the stock arm on 2–4" leveled Ford trucks to restore geometry, increase durability, and improve suspension travel. If you've lifted a Ford F-150, Expedition, or Navigator 2–4 inches, the factory upper control arms can leave your...

KSP PERFORMANCE forged aluminum upper control arms provide a one-piece, serviceable upgrade for 2007–2018 Silverado and Sierra 1500 trucks lifted 2–4", delivering increased strength, reduced weight and improved serviceability. If you run a lifted Chevy or GMC 1500 between the 2007 and 2018 model...

HAWK BROTHER's front lower control arm suspension kit is a complete, corrosion-resistant replacement set with pre-lubricated ball joints designed to fit specified RWD Dodge Charger, Challenger and Chrysler 300 models from 2011–2019. If your vehicle shows uneven tire wear, loose steering feel, or you’re...

TadaMark’s 8-piece front lower control arm suspension kit replaces worn suspension components on Chevrolet Malibu (2005–2012), Pontiac G6 (2005–2010) and Saturn Aura (2007–2009). This comprehensive kit groups the front lower control arms with preinstalled ball joints, sway bar end links and both inner and...

Rough Country's 0-3" N3 Rear Shock Absorbers (23144_A) are heavy-duty replacement shocks engineered to restore control, damping, and ride quality for 2007–2018 Jeep Wrangler JK models with 0–3" lifts. These rear shocks use a multi-stage valving design and nitrogen charge to deliver consistent performance...

Aeagle's 12-piece front suspension kit replaces worn control arms, ball joints, sway bars and tie rods to restore steering precision and ride comfort on Honda Accord models from 2008–2012. This comprehensive front suspension assembly bundle is engineered as a direct-fit replacement for Honda Accord...

Dynofit 1–3" Torsion Bar Keys with matching shock extender brackets provide a durable, adjustable leveling lift for 2020–2024 Chevy Silverado and GMC Sierra 2500HD/3500HD 4WD trucks, allowing safe fitment of larger tires while preserving factory geometry. This complete kit replaces factory torsion keys with...

Youxmoto front complete strut and coil spring assembly pair engineered to replace worn front shocks on Honda CR-V 2007–2014 2.4L models (part numbers 272491 / 272492). If your CR-V feels bouncy, leans in corners, or rides roughly, replacing the front strut assemblies restores factory-style...

A-Premium Front Complete Struts with Coil Springs and Rear Shock Absorbers are a full suspension replacement kit engineered to restore factory ride, handling, and vehicle height for 2006–2011 Honda Civic and Acura CSX models. If your Civic or CSX shows increased body roll, uneven...

Rough Country 2.5-6" N3 rear shock absorbers (part 23158_A) are heavy-duty, nitrogen-charged dampers engineered to restore control and improve ride quality for 1999–2006 Chevy and GMC 1500 trucks. These rear shocks combine multi-stage valving, military-grade fluid, and a large 54mm body to manage the...

Aeagle’s 10-piece front lower control arm kit is a complete replacement set designed to restore steering precision and suspension stability on Toyota Corolla models from 2003 to 2008. If your Corolla shows uneven tire wear, wandering steering, or clunks coming from the front suspension,...

SOSOPART’s 6-piece suspension kit replaces worn control arms, ball joints and sway bar end links to restore steering stability and chassis control on compatible Toyota and Lexus models. If your Camry, Highlander, Avalon or compatible Lexus is showing loose steering, uneven tire wear, or...

A-Premium Front Lower Control Arm assembly replaces the left or right front lower suspension arm on Toyota Sienna (2011–2020) and comes complete with pre-greased ball joint and bushing for direct-fit installation. This replacement front lower control arm from A-Premium is engineered as a one-piece...

Rough Country 0-3" N3 rear shocks (part 23220_D) are heavy-duty replacement dampers engineered to restore control, reduce bounce, and perform in extreme temperatures on Chevy/GMC 2500/3500 HD trucks. These N3 rear shocks are built for Class‑4/5 duty cycles—towing, hauling and off-road use—while fitting trucks...

Redline Tuning Hood Maxlift Plus (21-11039-02) replaces the stock hood prop on Ford Bronco 2021+ with a bolt-in, progressive-rate gas spring system that lifts the hood 8 inches higher for unobstructed engine bay access. The Hood Maxlift Plus streamlines your engine bay and makes...

The A-Premium Front Lower Control Arm assembly replaces both left and right front lower arms with pre-greased ball joints and rubber bushings to restore steering stability and reduce vibration. Designed for direct fitment to select Nissan models, this pair of front lower control arms...

Complete 10-piece front suspension kit from ILONPA that replaces upper control arms with ball joints, lower ball joints, sway bar links and tie rod ends for direct fit on 2007–2014 Chevy, GMC and Cadillac 1500-series trucks and SUVs. This ILONPA front-end kit gathers the...

RETRUE Rear Air Bags Suspension Kit is a direct-fit, bolt-on air helper spring system designed to restore level stance and improve load stability for Toyota Tacoma Prerunner and Tacoma 2WD/4WD (2005–2023). This kit replaces worn rear helper springs with adjustable air bags and hardware...

Rough Country 3.5–6.5" N3 front shock absorbers (model 23157_A) are heavy-duty replacement shocks engineered to restore control, ride stability, and damping for lifted 1999–2006 Chevy/GMC 1500 4WD trucks. These front shocks are built for trucks with a 3.5 to 6.5 inch lift and are...

FlexHitch 3.5" front and 3" rear lift kit raises 2007–2018 Silverado 1500 / Sierra 1500 trucks to level stance while using OEM shocks and maintaining factory fitment when compatible. This engineered leveling kit is built for Chevrolet Silverado 1500 and GMC Sierra 1500 models...

Rough Country N3 front and rear shocks are a nitrogen-charged, 10-stage variable-valving shock set engineered to improve ride control for 1997–2006 Jeep TJ models with 3.5–6" lifts. These N3 shocks are built to balance on-road comfort with off-road control by combining high-pressure nitrogen charging,...

Kryptonite 9920BJPACK is a complete heavy-duty replacement set of upper and lower ball joints engineered to restore steering precision and suspension durability on 1999–2023 Ford F-250 and F-350 Super Duty 4WD trucks. This comprehensive replacement package from Lassos Boutique contains both upper and lower...

Rough Country N3 rear shock absorbers (0–2.5") are heavy-duty, nitrogen-charged shocks engineered to improve ride control and stability for 2002–2018 Ram 1500 trucks. These rear shocks are a direct-fit replacement built to pair with light to moderate lift setups while keeping factory mounting points...

These WANKECAR 4PCS front and rear magnetic shock-absorber strut assemblies replace OEM units (e.g., 84176631, 84176675) for 2015–2020 GM trucks and SUVs equipped with MagneRide (RPO Z95). If your Cadillac Escalade, Escalade ESV, Chevrolet Tahoe/Suburban/Silverado, or GMC Yukon/Yukon XL was built with the Z95...