DAYUAN

DAYUAN 28-piece pneumatic diesel injector puller kit is an air-driven vibration tool and adapter set designed to remove seized or tightly fitted common-rail injectors quickly and safely. This professional-grade kit combines an air-powered vibration tool with a wide selection of adapters and extractor hooks...

DAYUAN 28Pcs Pull and Press Sleeve Kit is a complete steel sleeve set that lets you remove and install bushings, bearings, and seals without damaging suspension housings. Built from heat-treated 40CR steel and finished with a black oxide coating, this 28-piece sleeve kit covers...

DAYUAN 3L Hand Brake Fluid Bleeder Kit is a single-operator system that captures up to three liters of brake fluid and lets you bleed handbrake and hydraulic lines without a helper. If you service European vehicles or any car with hydraulic parking brakes, this...

DAYUAN 3L Manual Transmission Fluid Transfer Pump is a portable, mechanical filler and extractor kit that lets you transfer transmission fluid quickly and accurately using a hand pump, pressure gauge and vehicle-specific adapters. This compact 3‑liter fluid transfer system was designed for professional technicians...

DAYUAN 7Pcs Classic Vintage Car Molded Windshield Remover Tool Set is a heavy-duty, complete kit designed to safely cut and pry bonded windshields and trim from a wide range of vehicles. This professional-style 7-piece set brings together cutting wire, handles, a wire feeder, a...

DAYUAN's 13-piece alternator freewheel pulley kit is a professional-grade toolset for removing and installing one-way alternator pulleys on many European and global vehicles. This kit contains a carefully selected range of spline, star and hex sockets plus adaptors to work with Bosch- and Magneti...

DAYUAN 7Pcs Auto Body Repair Kit is a compact, professional-grade set of three fiberglass-shaft hammers and four precision trolleys designed to remove dents, shape panels, and finish car bodywork. This toolkit combines durable, heat-treated hammer heads with non-slip fiberglass handles and a selection of...

DAYUAN Ball Joint Press & U-Joint Removal Tool Kit is a 4-in-1 press and removal system designed to remove and install press-fit parts on 4WD vehicles, supplied in a high-impact blue blow-molded carrying case. If you work on trucks, SUVs or off-road vehicles, this...

DAYUAN 3-piece ball joint separator set is a compact front-end service kit built to remove ball joints, outer tie rods and pitman arms without damaging surrounding components. This three-piece kit combines a press-style ball joint separator, a classic splitter, and a conical pitman arm...

DAYUAN Universal Press Pull Sleeve Remove Install Bushes Bearings Tool Kit is a complete, heavy‑duty set designed to safely press out and fit bearings, bushes and seals across many cars, LCVs and HGV engines. This kit groups 20 press sleeves spanning 34–72mm internal diameters...

DAYUAN 12-piece Bearing Separator Puller Set is a heavy-duty 5-ton capacity kit designed to split and extract 2" and 3" bearings, gears, and flywheels safely and precisely. This compact, organized kit gives mechanics, hobbyists, and mobile technicians the tools to remove press-fit bearings and...

DAYUAN 14Pcs Bearing Separator Puller Set is a complete bearing-splitting and puller kit that includes 2" and 3" separators, a 5" cross-bar, a 6-1/4" forcing screw, and a blow-mold case for organized storage. This compact kit brings together drop-forged, heat-treated separator plates and robust...

DAYUAN's 52-in-1 Custom Bushing Driver Set is a complete bearing and seal press kit that lets you remove and install wheel bearings, seals, and bushings on cars and trucks with precise, interchangeable discs and a heavy-duty handle. This comprehensive driver set supplies 50 interchangeable...

DAYUAN 52-in-1 Custom Bushing Driver Set is a complete bearing and seal press kit that installs and removes wheel bearings, races, and seals across a wide range of cars and trucks. This heavy-duty driver set gives home mechanics and professionals a single, portable solution...

DAYUAN 17Pcs Diesel Engine Compression Tester is a complete compression diagnostic kit with a 0–70 bar (0–1000 psi) gauge, release valve and nine glow plug plus four injector adapters to measure diesel cylinder pressure accurately. This compression tester set is built for technicians and...

DAYUAN's 22-piece Disc Brake Caliper Piston Rewind Tool Kit is a complete, universal set for retracting caliper pistons and replacing brake pads on most cars, trucks and 4x4s. This compact kit bundles the adapters, left- and right-hand thrust bolts, reaction plates and a rugged...

DAYUAN Engine Cylinder Oil Pressure Diagnostic Tester Tool Set is a complete oil-pressure testing kit that lets mechanics and DIYers measure engine oil pump pressure, check low-oil warnings, and access hard-to-reach oil switch ports safely and accurately. Whether you’re diagnosing a ticking lifter, verifying...

DAYUAN's 3-piece exhaust pipe expander set reshapes and enlarges socketed exhaust tubes from 1-1/8" up to 3-1/2" so you get a leak-free, evenly expanded joint fast. If you work on automotive exhaust systems, a compact, reliable expander set can save time and keep connections...

DAYUAN Heavy Duty Fender Rolling Reforming Extending Tool is a handheld, telescoping roller system designed to safely roll and reform wheel arches from inside the wheel well to increase clearance and remove contact points. This professional-grade fender rolling tool combines a long, adjustable arm...

DAYUAN’s 5-piece front end service kit is a compact professional set for separating ball joints, tie rods and pitman arms cleanly without damaging surrounding components. Whether you’re a backyard mechanic or a professional technician, this blue five-piece kit brings durable, purpose-built tools to front-end...

DAYUAN 23-piece FWD Front Wheel Drive Bearing Removal Tool is a complete bearing press and installer set built to remove and install front wheel drive bearings without disassembling the knuckle or strut. This heavy-duty 23-piece kit gives technicians and DIYers the components needed to...

DAYUAN 46-piece harmonic balancer and flywheel puller set is a complete puller kit designed to remove harmonic balancers, steering wheels, flywheels, and similar press-fit parts across two- and three-hole patterns. This heavy-duty tool kit brings a broad selection of bolts, a heat-treated yoke, and...

DAYUAN's 13-piece Motorcycle Chain Breaker Set is a complete chain cutter and riveter kit designed to remove, shorten, and reinstall #35–#630 motorcycle, bicycle, ATV, and OHV cam chains with a hardened-steel press and a compact red case for easy transport. This kit combines a...

DAYUAN Motorcycle Chain Breaker Set is a 13-piece chain cutting and riveting toolkit in a compact blue case made to remove, resize, and reconnect #35–#630 motorcycle, bike and ATV chains. This metalworking kit gives riders and mechanics a portable solution for chain service without...