OEMTOOLS

The OEMTOOLS 25090 Harmonic Balancer Puller Kit is an adjustable 3-jaw puller set built to remove engine harmonic balancers and crankshaft pulleys in tight engine bays without radiator removal. This compact kit brings a pro-level solution to harmonic balancer and pulley removal by combining...

The OEMTOOLS 24986 is a heavy-duty rolling mechanic stool with a 300 lb capacity, built-in storage, and oversized casters for stable, smooth movement around the shop. Designed for mechanics, detailers and serious DIYers, this rolling workbench and creeper seat combines a wide, no-tip base...

The OEMTOOLS 37263 Exhaust Back Pressure Tester/Gauge Kit is a portable, adapter-ready tool for measuring exhaust back pressure through the oxygen sensor with clear dual psi/bar readings. This compact kit allows technicians and home mechanics to verify exhaust restriction and catalytic converter performance without...

The OEMTOOLS 37306 is a long-reach harmonic balancer and pulley installer kit built from alloy steel to safely install crank and underdrive pulleys on a wide range of Ford, GM, Dodge and Chrysler V6/V8 engines. When you need to press a harmonic balancer into...

The OEMTOOLS 27187 Harmonic Balancer Puller Kit is a heat-treated, floating-swivel puller set designed to safely remove harmonic balancers, vibration dampers, pulleys, and gears on many engines, including GM 3300 and 3800 V6s. This compact kit puts a workshop-grade puller and matched bolts into...

The OEMTOOLS Coolant Vacuum Refill Kit (model 24444) is a handheld toolset that vacuums out air and refills the cooling system through a sealed adapter, letting you top off coolant faster and without trapped air. When you service a radiator, replace a hose, or...

The OEMTOOLS 25264 GM Harmonic Balancer Puller is a clip-in crank pulley puller that removes harmonic balancers on GM LS and selected Chrysler/Jeep/Dodge engines quickly and without radiator removal. When you need to extract a crankshaft pulley or harmonic balancer from GM LS-family engines...

The OEMTOOLS 24389 Manual Fluid Extractor Pump is a 5.3L (1.4 gallon) hand-operated oil and fluid vacuum designed to remove engine oil, coolant, transmission fluid and other low-viscosity liquids quickly and cleanly without electricity. This compact extractor uses a manual hand pump and a...

The OEMTOOLS 24397 Manual Fluid Extractor Pump is a 9.5L-capacity, hand-operated evacuator designed for fast, clean removal of oil and other vehicle fluids without tilting or lifting equipment. This professional-grade fluid evacuator is built for mechanics and home enthusiasts who need a reliable, mess-free...

The OEMTOOLS 24936 is a portable 2‑gallon (8L) manual fluid extractor pump that pulls oil, coolant, transmission fluid and other low‑viscosity liquids through dipstick tubes without electricity. This compact, hand‑operated extractor is built for quick, clean fluid removal from cars, trucks, motorcycles, boats and...

OEMTOOLS 24412 Digital Tire Inflator is a handheld tire pressure gauge and inflator that delivers precise readings, quick inflation, and a durable, backlit LCD for workshop or roadside use. Designed for mechanics, fleet managers, and drivers who need dependable tire pressure checks and fast...

OEMTOOLS 27090 is a 10-ton C-frame anchor pin press built to remove S-cam brake pins and bushings without taking the hub or dust shield off. Built for heavy-duty truck and trailer service, this mechanical press is made from high-grade steel and delivers the force...

The OEMTOOLS 27069 Cooling System Pressure Test Pump is a handheld radiator pressure tester that pressurizes and monitors automotive cooling systems to locate leaks quickly and reliably. This compact, steel-built pressure pump provides a practical way to check cooling system integrity on most domestic...

OEMTOOLS 87032 is a 9-gallon upright oil drain with a 17" funnel, adjustable 32"–62" height, built-in drain valve, casters and an integrated tool rack for cleaner, faster oil changes. This upright portable oil drain is built for shops and home garages that need a...

The OEMTOOLS 24539 Heavy Duty U-Joint Puller is a solid-steel, impact-compatible tool that removes 1"–1.25" bearing cups from drivelines without hammering or heat. If you work on passenger cars, SUVs or light trucks (Class 1–3), this U-joint puller gives a controlled, damage-free method to...

The OEMTOOLS 24338 is a handheld 100A battery load tester that quickly evaluates 6V and 12V battery condition, cranking voltage, and charging system performance in about 10 seconds. Compact and built for workshop or roadside use, this tester combines a shock-resistant analog meter, copper-plated...

OEMTOOLS 87151 is a 10-piece oil filter cap wrench set with die-formed, non-slip grips and 3/8" drive compatibility for fast, secure oil filter removal. The OEMTOOLS 87151 10-piece set bundles ten common oil filter cap sockets so you can tackle oil changes across many...

The OEMTOOLS 24899 soft fender cover is a 42" x 24" fleece and microfiber protector with removable corner magnets designed to shield vehicle fenders from scratches and dings during maintenance. Keep painted fenders safe while you work. This OEMTOOLS fender cover pairs a plush...

OEMTOOLS Power Steering Pulley Puller and Installer Kit is a complete, portable tool set that removes and installs power steering pump pulleys on most domestic vehicles, including Ford, GM, Chrysler and VW models. This compact kit bundles the pullers, installers, adapters and fasteners needed...

OEMTOOLS 25647 Spark Plug Saver is a five-piece thread repair kit that permanently restores stripped M14 x 1.25 spark plug threads using a piloted reamer, three length inserts, and a swaging tool. When aluminum cylinder heads and worn threads threaten a reliable ignition seal,...

The OEMTOOLS 24687 is an 8-piece serpentine belt tool set with a 3/8-inch drive handle and multiple shallow sockets designed to release tensioners and speed belt removal and installation in tight engine spaces. If you work on late-model cars, light trucks, or perform routine...

OEMTOOLS 24434 is a heavy‑duty valve spring compressor designed to compress and release valve springs on 1991–2004 Ford, Lincoln, and Mercury 2‑valve V8 engines without removing the cylinder head. This compact, steel-built compressor lets technicians and home mechanics remove and replace valve springs, seals,...

OEMTOOLS 22389 Pro Magnetic Socket Tray is a slim, portable socket organizer that secures up to 36 sockets and tools with rubber-backed magnets and configurable studs. This compact magnetic socket tray combines a low-profile storage panel with removable studs and strong rubberized magnet strips...

OEMTOOLS 27261 is a 5-piece alternator decoupler pulley tool kit designed to remove and install both overriding alternator decoupler (OAD) and one-way clutch (OWC) pulleys quickly and reliably. Whether you're a professional technician or a DIY mechanic, having the right specialty tools makes alternator...