Brake Tools

AUTOOL's EPB Emergency Release Tool (BT10) is a handheld electronic parking brake drive device designed to safely release and apply electronic parking brakes for diagnostics, pad and rotor service, and roadside rescue. The BT10 combines a bidirectional motor drive with protective circuitry to let...

The FOUR UNCLES 2L Pneumatic Brake Bleeder Vacuum Pump Kit is a compressed-air powered, single-person brake and clutch fluid bleeding system that includes a 2L reservoir, 13 adapters and two 60-inch silicone hoses for fast, clean fluid extraction. This kit gives DIY mechanics and...

The Lisle 24300 Speedy Brake Pad Spreader quickly compresses disc brake pistons so you can replace pads faster and with less effort. Designed for mechanics and DIY enthusiasts, the Lisle 24300 is a hand-operated tool that pushes brake caliper pistons back into their bores...

VEVOR's 52-piece bearing press kit is a complete bushing driver and seal installer set designed to remove and install bearings and races cleanly and efficiently. This kit consolidates the common sizes and accessories mechanics, fabricators, and DIYers need to work on wheel bearings, seals,...

The Phoenix Systems V-5 (2104-B) Reverse Brake Bleeder is a compact, one-person tool that uses patented bottom-up reverse bleeding to remove trapped air and quickly service brakes and clutches on most vehicles. If you perform DIY maintenance or light professional work, the V-5 is...

ElaraBerry's 4-piece Automatic Slack Adjuster Release Tool Set is a compact ratcheting wrench kit engineered to make slack adjuster release and brake adjustment faster, safer, and more accurate on heavy-duty trucks and trailers. This slim toolkit groups three double-square ratcheting wrenches and one fork-end...

OMT 15-piece Drum & Disc Brake Tool Kit is a complete, durable set of caliper sockets, pliers and brake shoe tools designed to service drum and disc brakes on VW, Seat, Skoda, Opel, Renault and compatible Mercedes-Benz rear systems. This compact kit from Orion...

Wostore Eccentric Flaring Kit is a heavy-duty 7-die tool set that makes precise 45° flares in copper, brass, aluminum and mild steel tubing for HVAC, refrigeration, gas and brake-line work. This compact kit brings a hardened, eccentrically-mounted flaring cone, seven die sizes and a...

Orion Motor Tech’s OMT Single Dual Quad Piston Brake Caliper Press Tool compresses single, dual and quad pistons quickly and with minimal effort for fast, reliable brake pad replacement. Whether you’re a DIY mechanic or a professional technician, this compact caliper compressor is designed...

The Orion Motor Tech OMT Dual Piston Brake Caliper Compressor compresses dual piston calipers quickly and safely so you can replace pads or service brakes with less effort. When changing brake pads or servicing calipers, pushing pistons back evenly and without damage is essential....

The BreeRainz 3L Power Brake Pressure Bleeder Kit is a handheld, one-person brake bleeding system that pressurizes fresh fluid into the master cylinder and captures waste for fast, clean brake system service. If you maintain your own car or run a small shop, this...

GEAROLL Brake Line Flaring Tool Kit is a professional-grade flaring set that creates accurate 45° double flares, single flares, and bubble flares for 3/16" and 1/4" SAE brake and hydraulic tubing. This all-in-one kit supplies the clamping, punching and cutting tools needed to prepare...

FAITIO’s 3L Brake Fluid Bleeder Kit is a pressurized, one-person brake bleeding system with a 3-liter reservoir and 1-liter catch bottle that clears old fluid and trapped air without needing a helper. If you service brakes at home or in a small shop, this...

The OMT 2L Vacuum Brake Bleeder Kit is a pneumatic, single-operator solution that draws old brake fluid cleanly from calipers and wheel cylinders while automatically keeping the master cylinder topped off. If you change your own brake fluid or perform routine brake maintenance, this...

PQY Front Brake Line Lock Kit is a heavy-duty solenoid system that holds front brake pressure for drag starts and hill holds, compatible with 12–24V electrical systems and built to withstand pressure spikes up to 1000 psi. This PQY Roll Control Hill Holder Kit...

Orion Motor Tech’s OMT Brake Caliper Piston Compressor Tool compresses single, dual and quad caliper pistons quickly and with minimal effort to simplify brake pad changes. When replacing brake pads, returning caliper pistons to their bores can be the slowest, messiest part of the...

The Vehiclex Brake Caliper Compression Tool with standard plates compresses single and dual-piston calipers safely and steadily for pads replacement and brake service. When replacing brake pads or servicing calipers, controlled piston retraction prevents damage and makes the job faster. This tool combines reinforced...

Orion Motor Tech's Dual Piston Brake Caliper Compression Tool is a handheld, high-force compressor designed to retract dual caliper pistons quickly and safely for brake pad replacement. Replacing brake pads requires compressing pistons back into the caliper to make room for new pads. This...

Orion Motor Tech’s OMT single flaring and swaging kit is an all-in-one HVAC tubing set that cuts, flares and swages 1/8"–3/4" copper and aluminum lines for leak-resistant single flares. This compact kit brings the tools HVAC technicians, plumbers and DIYers need to prepare soft-metal...

Allstar Performance ALL11017 is a 16-ounce brake bleeder bottle kit with a magnetic mount, integrated one-way check valve, and 12" flexible hose for single-person brake bleeding. The ALL11017 bleeder bottle gathers brake fluid during bleeding while reducing the chance of air re-entering the system....

The VCC Power Steering Adapter Kit is a universal set of fittings and seals that lets you vacuum-bleed power steering systems quickly and without leaks. When flushing or bleeding a rack-and-pinion or hydraulic steering system, a reliable seal and standard connections make the job...

Camotokiit’s 45mm threaded power bleeder adapter is a corrosion-resistant aluminum fitting with a swivel connection that lets you attach a power bleeder to European brake systems quickly and securely. This compact adapter converts a 45mm bleed port to accept a power bleeder while the...

Wostore's 11-piece flaring & swaging kit creates precise 45° single flares and expands tube ends for reliable HVAC, refrigeration, and automotive connections. This compact kit brings together everything a technician or serious DIYer needs to cut, clamp, flare, and swage soft metal tubing from...

The BleedZone SRAM Brake Bleed Kit is a complete maintenance set that lets you flush and bleed compatible SRAM hydraulic brakes using 250ml DOT 5.1 fluid and professional-grade tools. Keep your hydraulic brakes responsive and safe with a kit tailored to SRAM systems. This...