GEAROLL

GEAROLL's Locking Pliers Slide Hammer Puller Set combines a 9.8-inch locking plier with a 2 lb slide hammer and quick‑release swivel connector to turn, grip, and extract stubborn bolts, nails, studs, pins and CV axles with control. This compact, two‑piece puller kit is made...

GEAROLL Gear Puller Set is a two-piece 3" and 7" reversible 2- or 3-jaw puller kit designed to remove gears, pulleys, bearings and flywheels quickly and with stable grip. This compact puller kit brings workshop-grade removal power into a portable package. It includes a...

GEAROLL's Camshaft Phaser Timing Chain Lock Tool Kit is a complete, portable set designed to lock, hold and align components on 3.6L Pentastar engines during timing chain service. This kit bundles the specialized locks and holding tools technicians need to work on Chrysler, Jeep,...

GEAROLL's 43-piece bearing press kit is a complete aluminum race and seal driver set with 39 adapters, four handles, a storage case and gloves designed to seat wheel bearings and seals evenly without damaging components. Whether you're a DIY mechanic or a professional technician,...

GEAROLL Truck Hub Seal Installer Kit is a complete heavy-duty set of five precision seal drivers and two extension handles designed to install hub seals on Class 7 and Class 8 trucks without removing brake drums. If you service large trucks or trailers, this...

The GEAROLL 43300 Pneumatic Fan Clutch Wrench Kit is an 8-piece air-hammer compatible set designed to quickly release fan clutches on many Ford, GM, Chrysler and Jeep engines without extra pin tools. This kit gathers multiple driving wrench sizes, a long handle and a...

GEAROLL Brake Line Flaring Tool Kit is a professional-grade flaring set that creates accurate 45° double flares, single flares, and bubble flares for 3/16" and 1/4" SAE brake and hydraulic tubing. This all-in-one kit supplies the clamping, punching and cutting tools needed to prepare...

GEAROLL Rear Axle Bearing Remove Puller Kit is a slide-hammer bearing removal set with a 4-point yoke and three adapters that extract semi-floating rear axle bearings with 1" to 2-7/8" inner diameters. This heavy-duty removal kit gives mechanics and DIYers a compact, purpose-built solution...

GEAROLL U Joint Puller 10105 is a heavy-duty universal extractor designed to remove U-joint bearing cups and similar press-fit parts from cars, trucks and light commercial vehicles efficiently and safely. When routine driveshaft service or a stubborn bearing cup keeps you in the shop,...

GEAROLL Harmonic Balancer Puller Installer Kit is a versatile, adjustable 3-jaw tool set designed to remove and install pressed-on harmonic dampers from a wide range of GM, Ford, Chrysler and other engines without radiator removal. This compact kit combines heavy-duty components and multiple jaw...

GEAROLL's cam timing tool kit is a complete steel set that lets technicians lock, pull, and set gear-train timing and adjust the Jake brake on Cummins ISX/QSX/X15 engines using 4–7° wedge options. This toolkit bundles the crank pin, cam gear puller, multiple wedge spacers,...

GEAROLL's 5-piece harmonic balancer installer set is a long-reach crank pulley installation kit that fits most Ford, GM, Dodge and Chrysler V6 and V8 engines for precise, damage-free damper fitting. If you work on American V6 and V8 engines, installing or replacing crankshaft pulleys...

GEAROLL's adjustable 3-jaw harmonic balancer puller kit is a heavy‑duty extractor set engineered to remove pressed‑on harmonic dampers and crank pulleys quickly and without disassembling surrounding components. When you're tackling an engine front-end job, an efficient, versatile puller saves time and reduces frustration. This...

GEAROLL's 10-piece Bearing Press Kit is a handheld race and seal driver set with nine aluminum adapters and a durable handle designed to install wheel bearings and seals evenly and without damage. This compact kit brings a garage-grade bearing press solution to DIY mechanics...

GEAROLL T-0158-HD is a heavy-duty universal automatic clutch drum spring compressor engineered to safely compress transmission return springs so snap rings can be removed and reinstalled quickly and accurately. If you work on automatic transmissions, this GEAROLL compressor is designed to make clutch drum...

GEAROLL Turbo Engine Timing Tool Kit is a complete camshaft and crankshaft locking set designed to accurately set and hold timing components on 1.0–1.4L Opel, Vauxhall and Chevy engines. This precision timing kit gives mechanics and DIYers the tools to lock camshafts, crankshafts and...

GEAROLL 15PCS Pulley Holder Tool Kit is a universal adjustable pin spanner wrench set designed to hold and turn camshaft and crankshaft pulleys, fan clutches and harmonic balancers using changeable pins and a 1/2" drive connection. This compact kit includes a long adjustable pin...

GEAROLL Lower Control Arm Prying Tool Kit is a heavy-duty prying set with two pry bar wrench adaptor heads made for separating lower ball joints and levering suspension arms safely and efficiently. This kit combines a purpose-built lower control arm pry, two interchangeable pry...

GEAROLL's 10-piece wheel alignment pin set is a compact toolkit of steel-alloy guide pins that hold and align wheels while you remove or refit lug bolts. When replacing, rotating, or servicing wheels it's easy for a heavy rim to slip off the hub as...

GEAROLL X3 Belt Changing Tool is a durable aluminum clutch removal kit designed to make belt changes on 2017–2023 Can‑Am Maverick X3 models faster, safer, and more repeatable. If you regularly service or race a Can‑Am Maverick X3, having a purpose-built belt tool speeds...

GEAROLL's 3-piece rear axle bearing puller set is a heavy-duty extractor kit designed to remove semi-floating rear axle bearings cleanly and quickly using a 5/8" slide hammer. When replacing worn or damaged rear axle bearings, having the right puller avoids costly housing damage and...

GEAROLL Flywheel Puller Tool (50mm x 1.5 LH) is a left-hand threaded removal tool engineered to extract Polaris flywheels and rotors cleanly and safely on compatible Ranger, RZR and Sportsman models. This puller is purpose-built for owners and mechanics working on Polaris ATVs and...

GEAROLL 77750 is a durable oil filter cutting tool with an adjustable vise jaw plate that cleanly opens filters from 2-3/8" to 5" so you can inspect elements and recycle metal safely. This compact, blue-anodized cutter is built for shops and DIY mechanics who...

GEAROLL 66515 is a dedicated harmonic balancer installation kit that fits SBC and BBC Chevy crankshafts, letting you press a balancer onto the crankshaft cleanly and accurately. This compact installer kit contains the threaded rod, nut, washers and thrust bearing needed to seat harmonic...