ReluxGo

The ReluxGo Inner CV Axle Puller is a complete slide-hammer removal kit designed to extract inner and outer CV shafts quickly using a 5/8"-18 slide hammer, interchangeable 63mm and 48mm forks, and a heavy-duty steel cable adapter. When you need to remove stubborn CV...

The ReluxGo Camshaft Timing Tool Kit is a complete alignment and locking set made to correctly position and secure camshafts for Ford 4.0L (4015cc) SOHC V6 engines used in 2004–2010 Ford, Land Rover and related vehicles. This precision kit contains the key fixtures technicians...

ReluxGo Coil Spring Compressor is a two-piece heavy-duty strut spring compression kit with a safety bracket and 2200 lb capacity for safe, controlled coil compression on cars, trucks, ATVs, and UTVs. Built for professional mechanics and DIY enthusiasts, this ReluxGo spring compressor combines hardened...

The ReluxGo Inner CV Axle Puller Tool Set is a heavy‑duty slide hammer kit with two fork adapters and an upgraded extension pole for safely removing stubborn inner CV axles from front‑wheel drive Ford Taurus and Mercury Sable models (1986–2021). When an inner CV...

ReluxGo's red wheel bearing puller and press kit removes and installs 3/4", 1", and 25 mm sealed wheel bearings on Harley-Davidson motorcycles quickly and without damaging the wheel. If you service Harley wheel bearings at home or in a small shop, this all-in-one ReluxGo...

ReluxGo Wheel Bearing Puller Kit is a compact, heavy-duty toolset designed to remove and install 3/4", 1" and 25mm sealed wheel bearings on Harley-Davidson motorcycles quickly and without damaging wheels. If you maintain or restore Harley-Davidson bikes from 2000 onward, having a purpose-built bearing...

The ReluxGo 32mm Ball Joint Separator is a heat‑treated carbon steel tool that quickly and safely separates 32mm ball joints, tie rods and control arms without harming surrounding parts. Designed for professional mechanics and DIY enthusiasts, this compact separator combines a 32mm jaw opening...

ReluxGo Axle Boot Clamp Tool Kit is a complete set for fitting and removing single-ear CV axle boot clamps, including a precision crimping plier plus 20 304 stainless single-ear clamps in two size ranges. If you service drive-shafts, CV joints, or routine axle boot...

The ReluxGo Harmonic Balancer Pulley Puller Set is an adjustable 3-jaw tool kit designed to safely extract harmonic dampers and balancers from a wide range of cars and trucks without removing the radiator. This five-piece puller set ships in a compact case and includes...

ReluxGo 25264 is a clip-style harmonic balancer puller designed to remove and install crank pulleys on many GM, Chrysler, Jeep, and Dodge engines without needing tapped holes. This specialized puller uses a spring-clip grip and a central forcing bolt to extract harmonic dampers safely...

ReluxGo Macpherson Strut Spring Compressor is a two-piece heavy-duty tool designed to compress coil springs safely and reliably on most small and medium vehicles. When replacing struts, changing shocks, or performing suspension maintenance on MacPherson strut assemblies, you need a compressor that gives a...

ReluxGo Front Wheel Hub Puller and Rear Axle Flange Remover set is a heavy-duty, heat-treated tool kit that lets you extract hub bearings and flange-type axles from 3-3/4" to 5-1/2" IDs using a 5/8" x 18 forcing bolt. Whether you are a home mechanic...

The ReluxGo 5-piece ball joint separator set is a complete pickle-fork and tie-rod removal kit with interchangeable forks, two handles, and a compact suitcase for fast, reliable suspension and steering disassembly. Whether you’re a home mechanic or a light-vehicle technician, this kit gathers the...

ReluxGo Serpentine Belt Removal Tensioner Tool is a purpose-built wrench and kit that lets you rotate the W11 engine belt tensioner to remove and replace the drive belt on Mini Cooper R52/R53 models quickly and reliably. When servicing a Mini Cooper S with the...

The ReluxGo Clutch Spring Compressor is a heavy-duty replacement tool designed to compress and remove clutch springs on a wide range of Harley-Davidson models from 1983–2017. This purpose-built compressor replaces part HD-38515A and is engineered to match or exceed the original specification so you...

The ReluxGo For GM LS Harmonic Balancer Puller 25264 is a three‑jaw clamp puller with a 22mm 1/2" drive socket designed to remove crank pulleys and dampers from GM and select Chrysler/Dodge/Jeep engines without tapped holes. If you need to extract a harmonic balancer...

ReluxGo Camshaft & Crankshaft Timing Locking Tool Kit secures cam and crank positions for accurate timing during belt, pulley, or seal service on many Volvo 4-, 5- and 6-cylinder engines. This precision kit is engineered to replace OEM tools 9995452/9995451 and covers a broad...

ReluxGo Universal Ball Joint Separator is an adjustable, heavy‑duty tool that safely pops press‑fit ball joints, tie rods and suspension arms without marring surrounding components. When you need a compact, reliable way to separate ball joints on cars, trucks or ATVs, this ReluxGo remover...

ReluxGo Primary & Secondary Polaris Polaris clutch puller kit is a pair of purpose-built tools that safely remove primary and secondary clutches from many Polaris ATVs and UTVs between 1985 and 2009. If you're working on belt service, clutch replacement, or routine maintenance on...

ReluxGo CV Boot Clamp Pliers are a precision tool for safely removing, crimping and securing single‑ear hose clamps on CV axle/dust boots. Designed for technicians and DIYers who work on drive shafts and constant velocity (CV) boots, this compact clamp plier set streamlines removing...

ReluxGo's Universal Adjustable Crankshaft Pulley Puller removes seized ribbed drive pulleys from crankshafts, alternators, A/C compressors and water pumps without damaging surrounding components. Built for professional mechanics and DIY enthusiasts, this adjustable ribbed pulley remover covers a wide jaw span from 35mm to 165mm...

The ReluxGo Diesel Injector Puller Tool is a slide-hammer kit built to extract stuck common‑rail diesel injectors quickly and without removing the cylinder head. If an injector is seized in the cylinder head, removing it safely requires controlled, repeatable force rather than improvisation. The...

ReluxGo's CV Axle Boot Clamp Pliers are a straight-jaw crimper that lets you compress ear-type CV boot clamps cleanly using a 1/2" drive for secure, leak-resistant seals. This tool is built specifically for mechanics and DIYers who need a reliable way to crimp and...

The ReluxGo Mainshaft Sprocket 1 7/8" Socket is a heat-treated AISI 1045 steel specialty tool built to remove and install the 1 7/8" transmission pulley locknut on Harley-Davidson Big Twins (1936–2006) and Twin Cam (1999–2006) engines. This precision socket is designed specifically for the...