JDMSPEED

JDMSPEED's 10-inch slim electric radiator fan is a reversible 12V cooling unit delivering up to 1750 CFM to improve radiator, A/C and engine-bay airflow. This compact but powerful fan swaps in as a universal replacement or upgrade for many cars, trucks, RVs and trailers....

JDMSPEED's 10.5mm HEI spark plug wire set is a seven-piece silicone-insulated replacement engineered to fit small- and big-block Chevrolet engines (SBC/BBC) with electronic HEI ignition systems. If you're rebuilding, upgrading, or replacing old plug wires on Chevy V8s like the 302, 305, 327, 350,...

JDMSPEED's 8-piece 10.5mm ignition wire set is a ready-to-install replacement designed for LS-series engines, providing a spiral-wound conductor and high-temp silicone boots for reliable spark delivery. If you're rebuilding, upgrading, or replacing worn ignition leads on LS1, LS2, LS3, LS6, LS7 or other LSx...

JDMSPEED New Red 10.5mm racing spark plug wires are a direct-fit, aftermarket replacement set engineered to deliver low-resistance ignition performance and reliable RFI suppression for Ford 5.0L and 5.8L small-block engines (SBF 302). These high-quality ignition leads pair a Kevlar-core conductor with heat-resistant silicone...

JDMSPEED's 12" Universal Slim Fan is a reversible 12V electric radiator fan designed for push or pull installation to boost cooling across radiators, intercoolers, A/C condensers and engine bays. This slim, high-flow fan kit delivers a compact, high-performance cooling option for many vehicles. Built...

JDMSPEED 12" x 2" trailer brake drum kit is a complete 6-on-5.5" hub-and-drum assembly designed to replace worn drums on 5200–6000 lb axles and fit common 6-bolt, 1/2"-20 stud configurations. This kit combines a 12" diameter x 2" face brake drum with preinstalled bearing...

JDMSPEED Universal 12V Electric Fuel Pump Kit supplies low-pressure fuel (3–6 PSI) with a 5/16" ID 6.56 ft fuel line, upgraded inline filter, ten hose clamps, and wiring for fast replacement on carbureted engines and equipment. This compact kit is designed to replace or...

JDMSPEED 7-153 oil pressure gauge kit is a 2-inch, 0–100 PSI automotive gauge designed for universal 12V installation to monitor engine oil pressure with a chrome bezel and black dial. Reliable oil pressure feedback helps you spot lubrication problems early and protect engine longevity....

JDMSPEED's 2-inch triple gauge kit combines oil pressure, water temperature, and voltmeter readouts into one compact cluster for accurate engine monitoring. This three-gauge set gives clear, at-a-glance engine data in a slim 2-inch housing that fits many American vehicles. Each instrument uses a white-face...

JDMSPEED 255LPH High Flow External Inline Fuel Pump is a universal, high-pressure replacement for GSL392/400-939 that delivers up to 255 liters per hour and supports performance builds up to about 650 HP. This external inline fuel pump by JDMSPEED is built as a direct-fit...

JDMSPEED 3" V-band flange and clamp kit is a stainless-steel, universal replacement designed to join turbo housings, downpipes and exhaust sections quickly and securely. This compact kit offers a simple mechanical solution for separating and reconnecting turbo and exhaust parts without welding or hard-to-reach...

JDMSPEED FV1T / FV1 3-port fuel selector valve lets you switch between a main and auxiliary tank electrically, routing fuel from either tank to the engine in 12V systems. This compact, in-line switching valve is built for vehicles equipped with one primary and one...

JDMSPEED 5th Wheel Hitch Puck Cover Plug Trim Ring Kit is a direct replacement set of puck covers, plugs and trim rings designed to restore the factory gooseneck/5th-wheel openings on Ford Super Duty trucks from 2011–2023. This replacement kit includes the exact components needed...

JDMSPEED’s 60-pound shaved door and trunk solenoid kit is a compact, high-force popper designed to release even stubborn doors, hoods, and trunks with a single push. This kit bundles a 60 lb-rated linear solenoid with a button switch, mounting bracket, wiring, and hardware so...

JDMSPEED's 9-inch slim 12V electric fan kit is a universal push/pull radiator cooling solution delivering up to 1730 CFM to improve airflow across radiators, intercoolers, and drivetrain components. This compact fan assembly is built for easy, no-modification installation on most vehicles and radiator types....

The JDMSPEED Automatic Transmission Shift Lever 905-109 is a direct-fit replacement gear selector designed to restore smooth, secure shifting in compatible Ford E-Series, F-Series trucks and Lincoln Navigator models. This replacement shift lever combines metal construction with ABS plastic components and an integrated overdrive...

JDMSPEED gloss-black B pillar molding is a direct-fit front right (passenger-side) door applique designed to replace part BB5Z7820554AB on Ford Explorer models from 2011–2016. This replacement B pillar trim restores the factory appearance where the original molding is scratched, faded, or missing. Molded from...

JDMSPEED's left front B-pillar molding with built-in illuminated door-entry keypad replaces the OEM piece (DB5Z-7820555-AC) for Ford Explorer models from 2011 to 2019. This replacement B-pillar applique restores the factory look and keypad functionality on Explorers equipped with the illuminated door-entry keypad option. Built...

JDMSPEED's 8N9510C-HD is a heavy-duty replacement carburetor designed to fit 1939–1952 Ford 2N, 8N and 9N tractors, supplied complete with gaskets, bolts and fuel inlet for a direct swap. Built as a compatible alternative to original Marvel Schebler and Zenith units, this carburetor is...

JDMSPEED replacement carburetor kit restores fuel delivery for Ford 2N, 8N and 9N tractors with 120 ci flathead engines from 1939–1952. This complete kit supplies a direct-fit carburetor and the common hardware you need to replace worn or damaged fuel components on classic Ford...

High-quality JDMSPEED carburetor engineered as a direct replacement for Yamaha Raptor 660/660R (2001–2005), restoring throttle response and reliable fuel delivery. This JDMSPEED carburetor is a 100% new aftermarket unit designed to replace Yamaha part numbers 5LP-14900-00-00, 5LP-14900-20-00, and 5LP-14900-30-00. Built from durable materials, it...

JDMSPEED's instrument dash cluster bezel replaces the worn or cracked factory panel on 1994–1997 Ford F-250, F-350 and F-Series Super Duty trucks with diesel engines (part F4TZ-15044D70-C). This replacement bezel is a direct-fit cosmetic and functional upgrade manufactured from high-quality ABS plastic. It restores...

JDMSPEED Universal External In-Line Fuel Pump is a compact 12V electric gasoline pump built for high-pressure injection systems, delivering up to 135 L/hr and adjustable pressure through a 1/8" NPT gauge port. This robust in-line pump is designed as a universal replacement for many...

JDMSPEED Fuel & Oil Filter FD4616 / FL2016 is a direct-fit replacement filter engineered to trap contaminants and protect the 6.0L Power Stroke turbo diesel fuel and oil systems in 2003–2007 Ford Super Duty trucks. This replacement unit fits model numbers FD4616, FD4604, 3C3Z-9N184-CA...