OEMTOOLS

OEMTOOLS 27090 is a 10-ton C-frame anchor pin press built to remove S-cam brake pins and bushings without taking the hub or dust shield off. Built for heavy-duty truck and trailer service, this mechanical press is made from high-grade steel and delivers the force...

The OEMTOOLS 25443 is a compact 200cc manual fluid extractor pump that lets you precisely remove or add automotive fluids using its translucent measuring cylinder and two connectable extension tubes. This handheld oil and fluid transfer pump is engineered for routine automotive maintenance tasks...

The OEMTOOLS 25104 is a 21-piece master ball joint press kit that lets you remove and install press-fit ball joints, U-joints, and brake anchor pins on 2WD and 4WD vehicles with a heavy-duty C-frame and a complete set of adapters. Built for technicians and...

The OEMTOOLS 24397 Manual Fluid Extractor Pump is a 9.5L-capacity, hand-operated evacuator designed for fast, clean removal of oil and other vehicle fluids without tilting or lifting equipment. This professional-grade fluid evacuator is built for mechanics and home enthusiasts who need a reliable, mess-free...

OEMTOOLS 25572 is a 500 mL manual fluid extractor pump that lets you remove and refill power steering, brake fluid, antifreeze and other non-fuel automotive liquids with precise control. This compact extractor combines a translucent 500 cc cylinder with molded dual-scale markings and two...

OEMTOOLS 3-jaw magnetic oil filter wrench is an adjustable, heavy-duty removal tool that grips 2.4"–3.6" filters and works with a 3/8" drive for fast, slip-free changes. If you change oil on cars, trucks, or equipment, this compact wrench saves time by securely clamping and...

OEMTOOLS 26501 is a three-piece gasket scraper set with heat-treated steel blades and steel striking caps made to remove old gaskets, sealant and adhesives safely and efficiently. Whether you're refreshing an engine component or prepping a flange for a new seal, the OEMTOOLS 26501...

The OEMTOOLS 25969 4-pin hub locknut socket is a rugged 1/2" drive tool built to safely remove and install Toyota free-wheel hub locknuts without rounding or slipping. When working on front-axle service for Toyota trucks and SUVs, the right socket makes the difference between...

The OEMTOOLS 7/8" (22 mm) O2 sensor wrench is a swivel-head, Posi-Grip removal tool built to access and extract oxygen sensors on Ford 4.6L and 5.4L engines and many other 7/8" sensors. When you need to remove an oxygen sensor from a crowded engine...

OEMTOOLS 87032 is a 9-gallon upright oil drain with a 17" funnel, adjustable 32"–62" height, built-in drain valve, casters and an integrated tool rack for cleaner, faster oil changes. This upright portable oil drain is built for shops and home garages that need a...

OEMTOOLS 27261 is a 5-piece alternator decoupler pulley tool kit designed to remove and install both overriding alternator decoupler (OAD) and one-way clutch (OWC) pulleys quickly and reliably. Whether you're a professional technician or a DIY mechanic, having the right specialty tools makes alternator...

OEMTOOLS 25252 is a heavy-duty automatic slack adjuster tool with an angled fork and reversible ratchet wrench designed to speed and simplify air brake adjustments on semi trucks and trailers. When you service commercial air brakes, access, leverage, and control matter. The OEMTOOLS 25252...

OEMTOOLS 27399 Ball Joint Spanner Wrench removes and installs ball joint adjusting sleeves on 1/2, 3/4 and 1-ton Dana 44 open yoke front axles. If you work on older front-wheel-drive trucks and light-duty rigs, the OEMTOOLS 27399 is a purpose-built spanner wrench that simplifies...

The OEMTOOLS 24338 is a handheld 100A battery load tester that quickly evaluates 6V and 12V battery condition, cranking voltage, and charging system performance in about 10 seconds. Compact and built for workshop or roadside use, this tester combines a shock-resistant analog meter, copper-plated...

OEMTOOLS 24518 Brake Caliper Hanger Set is an eight-piece kit of hi‑vis green hooks designed to hold calipers, brake hoses and other undercar parts safely out of the way during brake, suspension, and drivetrain repairs. When you remove brake calipers or open suspension components,...

OEMTOOLS Brake Hub Resurfacing Tool is a drill-powered cleaning kit that removes rust and corrosion from wheel hubs and rotor mounting surfaces so rotors sit flush and reduce vibration. If you install new rotors or service brakes, surface rust and debris on the hub...

The OEMTOOLS 87013 is a clear, 4.5-liter oil drain pan with an integrated volume scale and filter shelf for easy, accurate oil changes. This transparent drain pan was designed to make routine oil changes cleaner and more predictable. Its chemical-resistant construction stands up to...

These are four collapsible, magnet-backed parts trays from OEMTOOLS that expand to hold small hardware and collapse flat for compact storage. Keep fasteners and small components organized with a compact, color-coded system designed for mechanics, technicians, and hobbyists. The OEMTOOLS 26052 set includes four...

OEMTOOLS Collapsible Magnetic Tray Set is a pair of foldable silicone bowls with magnetic bases that secure and organize nuts, bolts, and small tools on metal surfaces. Built for mechanics, hobbyists, and anyone who works with small parts, these 4-1/2" magnetic trays collapse flat...

The OEMTOOLS Coolant Vacuum Refill Kit (model 24444) is a handheld toolset that vacuums out air and refills the cooling system through a sealed adapter, letting you top off coolant faster and without trapped air. When you service a radiator, replace a hose, or...

The OEMTOOLS 27069 Cooling System Pressure Test Pump is a handheld radiator pressure tester that pressurizes and monitors automotive cooling systems to locate leaks quickly and reliably. This compact, steel-built pressure pump provides a practical way to check cooling system integrity on most domestic...

OEMTOOLS 24412 Digital Tire Inflator is a handheld tire pressure gauge and inflator that delivers precise readings, quick inflation, and a durable, backlit LCD for workshop or roadside use. Designed for mechanics, fleet managers, and drivers who need dependable tire pressure checks and fast...

The OEMTOOLS 37263 Exhaust Back Pressure Tester/Gauge Kit is a portable, adapter-ready tool for measuring exhaust back pressure through the oxygen sensor with clear dual psi/bar readings. This compact kit allows technicians and home mechanics to verify exhaust restriction and catalytic converter performance without...

The OEMTOOLS 25264 GM Harmonic Balancer Puller is a clip-in crank pulley puller that removes harmonic balancers on GM LS and selected Chrysler/Jeep/Dodge engines quickly and without radiator removal. When you need to extract a crankshaft pulley or harmonic balancer from GM LS-family engines...