SEHNSUCHT

SEHNSUCHT 12" x 2" electric trailer brakes (set of four) are manual-adjusting assemblies designed to replace worn units on 5-hole axles rated 5,200–7,000 lb. These replacement electric brakes come as two left- and two right-hand assemblies sized 12" x 2" and built for standard...

SEHNSUCHT’s 12" x 2" trailer brake drum kit is a complete 8-lug replacement assembly engineered to restore braking performance on 7000 lb axles with an 8 on 6.5" bolt pattern. This kit bundles a forged iron brake drum with corrosion-resistant electroplating plus the bearings,...

SEHNSUCHT's 12" x 2" 6-hole trailer brake drum kit is a complete replacement hub/drum assembly built for 5200–6000 lb axles, providing a corrosion-resistant iron drum, bearings, seal, dust cap and hardware for 6×5.5" bolt circles. When a worn or damaged brake drum threatens trailer...

Two heavy-duty 4-leaf springs and a complete U-bolt and hanger hardware kit designed to replace SW4B trailer springs and restore a 3,500 lb single-axle suspension. This SEHNSUCHT replacement kit supplies everything needed to refresh a single-axle trailer suspension: two 4-leaf springs rated 1,750 lb...

SEHNSUCHT A-Frame Trailer Jack is a heavy-duty, top-wind jack that lifts up to 5,000 lbs with 15 inches of vertical travel for stable, corrosion-resistant trailer support. Built to handle utility trailers, boat trailers, and campers, this top-crank A-frame jack combines high load capacity with...

SEHNSUCHT 11195 is a brand-new 12V, 100A alternator engineered to replace the factory unit on Toyota Camry 2.4L (2007–2009) and compatible non-hybrid models of Corolla, Matrix and Scion listed in the fitment. This replacement alternator delivers stable 12‑volt charging, an industry‑grade 100 amp output,...

The SEHNSUCHT 12V 150Amp alternator is a direct-fit replacement designed to restore reliable charging for specific Ford and Mazda 2.0L–2.5L models from 2008–2013. If your vehicle is experiencing dimming lights, drained battery warnings, or inconsistent electrical performance, replacing the alternator with a correct-fit unit...

SEHNSUCHT replacement alternator delivers 130A of stable 12V electrical power for compatible Chevy and Buick 4‑cylinder engines from 2013–2020. This new alternator is engineered as a direct-fit replacement for a range of GM 2.0L and 2.5L naturally aspirated and turbocharged four‑cylinder engines. It replaces...

SEHNSUCHT 11326 is a brand-new 12V, 150A direct-replacement alternator designed for 3.5L V6 Toyota and Lexus models, built to restore reliable charging and steady electrical output. If your vehicle is showing battery-warning lights, dimming headlights, or accessory power loss, a worn alternator can be...

SEHNSUCHT Go Kart 3/4" bore centrifugal clutch with a 10-tooth sprocket and #40/#41/#420 chain delivers a plug-and-play drivetrain solution for mini bikes and kart builds using Predator 212 and popular Honda clone engines up to 6.5 HP. If you're converting a minibike, building a...

SEHNSUCHT centrifugal clutch with a 3/4" (19.05mm) bore and 10-tooth sprocket for #40/#41/#420 chain provides a bolt-on drive solution for small minibikes, go-karts and cloned Honda engines up to 6.5 HP. This compact clutch kit is engineered to attach directly to a 3/4" crankshaft...

This SEHNSUCHT CVT torque converter kit replaces Comet TAV2 models and converts a 3/4" straight crankshaft engine into a smooth, belt-driven transmission for mini bikes and go karts. Built to fit common 6.5HP (212cc) horizontal-shaft engines, this complete drive kit includes a 3/4" bore...

SEHNSUCHT Driver Pulley Replacement is a direct-fit 3/4" bore torque converter driver for 30 series go-kart and mini-bike engines, built to restore clutch engagement and deliver reliable torque transfer for 6.5HP (up to 8HP) single-cylinder engines. This driver pulley is engineered as a replacement...

Compact 12-tooth centrifugal clutch with a 3/4" (19.05mm) bore and 4-foot #35 chain, engineered to drive one-wheel go-karts and small ride-on builds using 2–6.5 HP engines like Predator 212 and Honda GX/GX clones. This SEHNSUCHT clutch kit includes the clutch body, a 4-foot #35...

SEHNSUCHT heavy-duty go-kart clutch, 5/8" bore with 11 teeth for #35 chain, designed to fit 97cc (2.8HP) and similar small engines. This compact clutch assembly delivers a ready-to-install replacement for minibikes, go-karts, mini choppers and light garden equipment driven by 97cc (2.8HP) engines or...

SEHNSUCHT Fit for Gy6 150cc High Performance Clutch Set is a complete variator and clutch assembly with a durable 743 belt engineered to restore acceleration, improve torque delivery, and replace worn CVT components on Gy6 125cc/150cc 152QMI/157QMJ engines. If your scooter, ATV, or short-case...

SEHNSUCHT's Fit for Gy6 50cc Clutch Assembly Kit is a complete replacement clutch and variator system engineered to fit Gy6 50cc (139QMB) 4-stroke scooters and small ATVs. Whether you're restoring a scooter, upgrading for better throttle response, or replacing a worn transmission component, this...

The SEHNSUCHT Super 30 Series torque converter driver clutch is a direct-fit, high-response replacement designed for 30-series TAV kits with a 3/4" (19mm) shaft, delivering smoother engagement and greater belt life for 2–8 HP small-engine go-karts and mini bikes. This clutch is built to...

SEHNSUCHT Trailer Brake Drum Kit is a complete 5-hole, 4.5" bolt circle hub and drum assembly built for standard-lube 3500 lb axles, supplied with bearings, seal, dust cap and hub nuts for direct replacement. This replacement brake drum kit is engineered to restore wheel...

SEHNSUCHT Trailer Axle Electric Brake Kit is a complete pair of 10" x 2-1/4" self-adjusting electric brakes with 5-on-4.5" drums engineered for 3,500 lb trailer axles. This kit bundles two rust-resistant brake drums, a matched left and right electric brake assembly, bearings, seals, caps...

SEHNSUCHT's kit pairs two 5-on-5" hub drums with matching 10" x 2-1/4" manual-adjust electric brakes for 3,500 lb trailer axles, offering a complete replacement set for standard-lube 1‑1/16"–1‑3/8" spindles. This all-in-one replacement assembly supplies the hub drums, bearings, seals, dust caps, nuts and a...

SEHNSUCHT trailer electric brakes — a four-piece set (two left, two right) of 10" x 2-1/4" assemblies designed to bolt onto 4-hole 3,500 lb axles for dependable stopping power on tow vehicles and utility trailers. These SEHNSUCHT electric drum brakes are built to replace...

SEHNSUCHT Trailer Electric Brakes are a manually adjusting 10" x 2-1/4" left and right brake assembly pair designed for 3,500 lb trailer axles, offering reliable stopping performance for bolt-on 4-hole mounting. These SEHNSUCHT electric brake assemblies are built to replace worn or damaged brake...

These are a pair of SEHNSUCHT 12" x 2" manual-adjust electric trailer brake assemblies (left and right) designed for bolt-on fitment to 5200–7000 lb axles. If you need replacement electric brakes for a Dexter-style 5-hole trailer axle or a compatible 5200–7000 lb axle, this...