WnSEu

WnSEu 25-foot 3/8" (10mm) nylon fuel line tubing is a heat- and corrosion-resistant replacement tube designed for repairing or rerouting low-pressure automotive fuel and fluid lines. Whether you're restoring a vintage mower, replacing aging hose on a commuter motorcycle, or stocking a workshop, this...

WnSEu's 36-inch stainless-steel braided 4AN turbocharger sensor and oil feed line kit delivers a durable, leak-resistant connection for remote-mounted pressure sensors and turbo oil feeds. This kit pairs stainless-steel fittings with Teflon-lined hose and a protective steel braid to route pressure or oil lines...

WnSEu's 6 Port Vacuum Block is an aluminum billet intake manifold adapter that gives you six 1/8NPT vacuum ports for cleanly routing boost, gauge, wastegate and controller lines. This compact vacuum manifold simplifies plumbing on turbocharged engines by providing a single, durable mounting point...

WnSEu AN6 20FT Fuel Line Hose Kit is a complete stainless-steel braided AN6 fuel line set with fittings and tools for building or repairing 3/8" (8.73mm) ID fuel runs. This kit supplies 20 feet of AN6-compatible, stainless-steel braided hose and a selection of reusable...

WnSEu's billet aluminum fuel filter housing cap replaces the original cap on 2017–2019 Chevy and GMC 6.6L L5P Duramax trucks to provide a durable, anodized black alternative that installs directly in place of the OE part. This replacement cap is engineered to match the...

WnSEu Braided AN6 Dual Feed Carb Fuel Line is a stainless-steel braided double-feed fuel hose assembly made to supply two pumps for Holley 4150/Dominator 7/8"-20 carbs. This braided AN6 dual-feed fuel line kit replaces single-feed plumbing and delivers a reliable two-pump supply for Holley...

These anodized aluminum coil brackets let you mount D581-style ignition coils to LSX swap valve covers (fits part numbers D581, D514A, D510C, 12558693) for LS1/LS2/LS3/LQ4/LQ9 5.3L engines. When converting a truck or swapping an LS family engine, ignition coil placement and clearance around the...

WnSEu Engine 7100 Lifting Bracket Kit is a four-piece steel set designed to lift and balance engines up to 5,500 pounds when used with load levelers or lifting slings. When you're removing, installing, or repositioning heavy powertrains, the right brackets make the job safer...

WnSEu's Fuel Pump Alignment Installation Gauge EN-51092 is a precision aluminum tool that fits into GM fuel pump bores to show when the pump is perfectly flush with the intake manifold for correct installation. When replacing or installing an in-tank fuel pump on GM...

WnSEu's locking braided automatic transmission dipstick gives Ford F-150 (2010–2017) owners a durable, easy-to-read way to check transmission fluid level and condition. If you drive a Ford F-150 from model years 2010 through 2017 — including many Raptors from 2011–2014 and 2017–2023 — the...

WnSEu MSCRP LS Gen 3 Low Profile Valley Pan Cover Plate is a corrosion‑resistant 6061‑aluminum replacement plate that seals the engine valley for LS Gen III V8 blocks and includes a dedicated gasket and seals. This valley pan cover plate is engineered specifically for...

WnSEu's LS serpentine alternator bracket and power steering pump swap conversion repositions the pump and reverses the alternator to enable clean, reliable accessory drive fits on Chevrolet 4.8L–6.2L truck and SUV LS engines. When retrofitting or upgrading an LS-series engine in trucks and SUVs,...

WnSEu's LS Throttle Body Bypass Hose Kit provides a complete, reusable coolant/steam crossover solution for GM LS-series engines to route coolant between head ports without using intake manifolds. This kit supplies the parts needed to connect the coolant/steam ports on LS-series cylinder heads when...

WnSEu Master Link Press Tool quickly and securely presses clip-style master link plates on 520 and 525 motorcycle chains, and can be adapted for some 530 chains. This compact press tool is engineered to make installing and removing clip-style master links faster and more...

WnSEu Universal Reusable Brass Wheel Spoke Balance Weights Refill are brass clip-on weights designed to rebalance motorcycle spoked wheels quickly and reuse repeatedly. These refill weights deliver a practical, low-profile solution for restoring balance to spoke-type motorcycle wheels without removing tires or breaking spokes....

WnSEu's MSCRP AN4 kit is a stainless-steel and aluminum alloy plumbing set that replaces stock fuel, brake, coolant crossover, and steam vent lines on LS-family engines for a cleaner, more durable installation. This complete kit is designed for GM LS-series engines (LS1, LS2, LS3,...

The WnSEu MSCRP C5 Corvette fuel filter regulator is a 58 PSI, high-flow EFI regulator engineered for LS-swap and C5 Corvette conversions that supports up to 550–600 HP while delivering as much as 255 LPH fuel flow. If you're converting a C5 Corvette or...

WnSEu MSCRP Jack Pad floor jack bolt-on jack points are anodized billet aluminum adapters that provide safe, damage-free lifting points for 6th‑generation Camaro (2016–2018). This kit supplies four bolt-in jack pad adapters engineered specifically for the 6th gen Chevrolet Camaro (model years 2016–2018). Machined...

WnSEu MSCRP 77750 is a dedicated oil filter cutter that cleanly splits canister filters sized 2 3/8" to 5" for safe inspection and oil recycling. Compact and built for repeated shop use, this cutter combines a hard-anodized aluminum frame with precision steel blades so...

WnSEu's R4 AC Compressor Bracket is a CNC-machined aluminum high-mount kit that positions an LS-series A/C compressor with an integrated belt tensioner for Chevy and GMC Vortec truck and SUV engines. This high-mount A/C bracket kit is designed to adapt modern LS-series compressors to...

WnSEu Rear Wide Grab Bars are a durable, corrosion‑resistant replacement designed to fit Yamaha ATV Raptor 700 and 700R models from 2006–2021, providing wider handhold options and improved rear stability. If you want a stronger, wider grab bar that installs without major modification, these...

The WnSEu 1/2"-13 chrome mounting adapter lets you attach a standard 1/2"-13 thread-on shift knob to Eaton Fuller style 13/15/18 shifters quickly and securely. This compact chrome adapter bridges common aftermarket shift knobs and Eaton Fuller-type transmission levers used in many medium- and heavy-duty...

WnSEu MSCRP 141-638 is a black anodized, 4-wire aluminum spark plug wire loom designed to organize and protect 7–8 mm wires on Small Block Chevy engines. This machined wire loom replaces messy routing with a tidy, heat-resistant rail that mounts cleanly to Small Block...

WnSEu TH350 Transmission Shifter is a complete 12" chrome stick designed to mount directly to GM Turbo 350 automatic transmissions and includes a gated lock-out safety feature. This replacement shifter is built for drivers restoring or modifying vehicles that use the GM Turbo 350...