Autel

Autel's original 16-pin 3-row OBD2 main test cable is a factory-compatible diagnostic lead that links specific Autel scanners to a vehicle’s OBDII port for data transmission, coding, and ECU access. If you own a supported Autel tablet or handheld that requires the 3-row interface,...

Autel MX-Sensor 1-Sensor is a programmable, dual-frequency (315/433 MHz) TPMS unit with interchangeable rubber valve that replaces most OE sensors and is designed to be programmed only with Autel TPMS tools. Built to simplify inventory and speed repairs, the Autel MX-Sensor consolidates multiple sensor...

Autel TPMS MX-Sensor is a programmable, OE-quality tire-pressure monitoring sensor that supports both 315MHz and 433MHz frequencies for broad vehicle compatibility. Designed as a universal replacement sensor, the Autel MX-Sensor combines dual-frequency operation, interchangeable valve stems, and the latest 88-series chip so technicians and...

The Autel TCAN003 is an original 2‑in‑1 Tesla diagnostic splitter cable that connects Autel scanners to Tesla Model Y, S, X (all years) and Model 3 vehicles built after 2021 (heat pump) for full CAN/OBD2 access. This genuine Autel diagnostic adapter replaces earlier 12‑pin...

The Autel 10ft (3m) 16-pin OBD2 extension cable is a durable male-to-female diagnostic extender that gives you extra reach and easier access to your vehicle’s OBD-II port. If your scan tool, GPS tracker, dashcam, or tuning device needs more room than the factory diagnostic...

The Autel MS309 is a compact, plug-and-play OBD2 code reader that reads and clears engine fault codes, shows DTC definitions, and reports emission readiness on standard OBD-II vehicles. The Autel MS309 is a no-frills diagnostic scanner designed for vehicle owners who want a straightforward...

Autel Original OBD2 Main Test Cable is a 16‑pin, 5.6‑ft wired diagnostic lead that links compatible Autel scanners to your vehicle’s OBDII port for reliable data transfer and testing. This genuine Autel main test cable provides a straightforward, wired connection between selected Autel handheld...

An Autel 20-pin to 16-pin adapter cable that links older BMW OBD1 diagnostic ports to modern OBD2 16-pin scanners for reliable data transfer and ECU access. If you own a BMW with a pre-OBD2 20-pin diagnostic socket, this Autel original converter cable lets you...

Autel's Original J1939-to-OBD2 Type‑2 green 9‑pin & 6‑pin Y adapter converts heavy‑duty truck J1939/J1708 ports into a standard 16‑pin OBD2 connector for compatible diagnostic tools. This heavy‑duty Y‑cable is built to bridge the gap between diesel truck proprietary ports and universal OBD2 scanners. It...

Autel's original 16-pin OBD2 Y splitter extension cable is a 1 ft (30 cm) male-to-two-female adapter that lets you connect two OBDII devices to a single vehicle diagnostic port at the same time. This compact, plug-and-play extension is built for technicians, vehicle owners, and...

Autel's Original OBD2 Security Gateway (SGW) Bypass Cable lets compatible 2018–2020 Dodge Cummins RAM 1500/2500 trucks connect standard OBD2 scanners to vehicle modules by routing around the factory gateway. This Autel SGW bypass connector is a purpose-built adapter that restores diagnostic access for Cummins...

Autel's Euro5 6-pin to 16-pin OBD2 adapter cable lets you connect Euro5 motorcycle 6-pin diagnostic ports to standard 16-pin OBD2 scanners for data transfer and troubleshooting. When workshops or DIY riders need to link modern Euro5 motorcycles to generic diagnostic devices, pinout differences can...

Autel's Original J1939 Type 2 9-pin to OBD2 Y cable converts a green 9-pin J1939 truck port into one J1939 female and one 16-pin OBD2 female connector for simultaneous diagnostics and device connections. This heavy-duty adapter cable is designed to bridge round green Type...

The Autel MS300 is a compact plug-and-play OBD2 code reader that reads and erases diagnostic trouble codes, resets the check engine light, and reports emissions readiness. The MS300 is a handheld car scanner designed for drivers who want a simple, reliable way to diagnose...

The Autel ENET OBD2 Cable is an Ethernet-to-OBD-II data link built to let diagnostic tools and PCs communicate with BMW F- and G-series vehicles for coding, module programming, and vehicle diagnostics. This ENET cable converts an Ethernet connection to a BMW OBD-II port, delivering...

The Autel 7-pin OBD1 to 16-pin OBD2 adapter cable converts older Ford 7-pin diagnostic ports (1985–1991 EFI) to a standard 16-pin OBD2 connector so you can use modern scanners for basic communication and code reading. Many early Ford EFI vehicles use a nonstandard 7-pin...

The Autel MS309 is a compact, plug-and-play OBD-II scanner that reads and clears generic engine trouble codes and displays code definitions to help diagnose check engine lights. The MS309 is designed for everyday drivers and DIYers who want a straightforward tool to identify engine...

The Autel Original 3-in-1 OBD2 Adapter Cable converts a 16-pin OBDII port to 6-, 4- and 3-pin OBD1-style connectors so compatible motorcycles and vehicles can link to standard OBDII diagnostic tools. If you own a later-model European motorcycle or select vehicles that use older...

The Autel Original OBD Diagnostic Adapter converts a 9-pin J1939 male port into a standard 16-pin OBDII female connector for easy use with OBD2 scanners and fleet devices. This compact Autel adapter provides a simple, space-saving bridge between commercial vehicle J1939 ports and OBD2...

The Autel Original OBD1 to OBD2 GM Adapter Cable is a 12‑pin to 16‑pin converter that lets you connect OBD2 diagnostic tools to compatible GM vehicles with a 12‑pin OBD1 socket. When you have a GM car with an older 12‑pin diagnostic port but...

Autel MX Sensor Rubber Valve Stem Kit provides four press-in replacement rubber valve stems designed specifically for Autel MX-Series TPMS sensors, delivering a secure, leak-resistant seal and quick tool-free installation. These replacement valve stems are tailored to match the specifications of Autel MX-Series tire...

The Autel ML629 is a handheld 4-system OBD2 diagnostic scanner that reads and clears engine, transmission, ABS and SRS codes while offering full OBDII test modes and live-data graphing. Designed as an upgrade from basic code readers, the 2026 Autel ML629 combines multi-system fault...

Autel MX TPMS Sensors are programmable dual-frequency tire-pressure sensors designed to replace most OE sensors with one universal, high-signal, lightweight unit. Engineered for professional tire shops and tech-savvy DIYers, the Autel MX sensor combines 315MHz and 433MHz compatibility in a single body so one...

Autel 4PCS Metal Valve Stem Kit for MX-Sensor provides four factory-fit, SAE-certified metal valve stems engineered specifically for Autel MX-Series TPMS sensors to ensure precise sealing and easy installation. These valve stems are made to match the Autel MX tire pressure monitoring sensors, offering...