DPTOOL

DPTOOL Air Conditioner Clutch Installer Tool is a complete steel kit designed to safely remove and install A/C compressor clutches so you can service the clutch without replacing the entire compressor. When an A/C compressor clutch needs service, the right holding and installer tools...

DPTOOL Fuel Injector Puller Removal Tool and Seal Installer Kit is a complete steel toolset made to safely extract fuel injectors and fit new injector seals for a wide range of BMW engines. This professional-grade kit groups three injector pullers, a slide-hammer pulling system,...

DPTOOL Fuel Injector Rail Assembly Remover Tool Kit GM245 is a complete service set designed to safely extract direct-injection fuel rails and install Teflon injector seals on specified GM and compatible engines. This kit brings together the rail puller and multiple seal-installation guides and...

DPTOOL's 1/2" drive flip socket lug-nut set is a half-size, thin-wall impact-ready kit designed to remove rounded, expanded, or damaged wheel nuts while protecting alloy rims. This compact set pairs half-size, thin-wall flip sockets with a removable non-marring sleeve and a 3" extension for...

DPTOOL Engine Timing Tool Kit is a complete camshaft, crankshaft and flywheel locking set designed to set and lock timing on GM 2.8–4.2 V6 engines safely and accurately. This heavy-duty timing tool kit is built to service a wide range of GM family engines...

DPTOOL's Engine Timing Tool Kit is a complete 15-piece set engineered to lock and align camshafts, chain tensioners, and the water pump sprocket for GM 2.0L and 2.4L ECOTEC engines. This toolkit collects the specific fixtures technicians need when servicing timing components on select...

DPTOOL Harmonic Balancer Damper Pulley Puller Extractor Kit is a six‑jaw, dual‑fit pulley removal tool designed to extract stubborn harmonic dampers in tight engine bays without radiator removal. This upgraded DPTOOL kit combines three thicker jaws and three thinner jaws so the same tool...

DPTOOL Engine Timing Tool Kit for Ford 2.0T / 2.3T is a complete, OEM-equivalent camshaft and crankshaft locking set built to accurately set and hold timing on Ford and Jaguar/Land Rover 2.0T/2.3T petrol engines. This professional timing kit contains the full selection of alignment...

DPTOOL 14mm Back Tap Spark Plug Thread Repair Kit is a pair of M14x1.25 thread chasers (short and long) designed to restore damaged spark plug threads without removing the cylinder head. This thread repair set provides a reusable, mechanical way to clean and reform...

DPTOOL 8pc Strut Nut Socket set is a purpose-built kit for removing and installing suspension strut nuts on cars with 12-point fasteners using a 1/2" drive. This compact tool set bundles six commonly used socket sizes with two specialized strut spreader tools so mechanics...

DPTOOL's 15-piece auxiliary idler/timing belt tensioner pulley removal kit is a compact wrench and adapter set designed to release and remove belt tensioners and pulleys in tight engine bays. Whether you're a professional mechanic or a DIYer working on cars with crowded engine compartments,...

DPTOOL Noid Light Test Kit is a compact diagnostic kit that quickly shows whether fuel injectors and IAC valves are receiving an electrical pulse from the engine control module. This kit bundles eight noid lights, an IAC tester, an extension lead and a portable...

DPTOOL 303-1248 is a precision camshaft holding and timing alignment kit engineered to secure Ford 3.5L and 3.7L Cyclone V6 camshafts at TDC for accurate servicing. This engineered timing tool set gives mechanics and advanced DIYers a robust, vehicle-specific solution when performing cam-related work...

DPTOOL's heater fan blower remove/install tool is a precision puller designed to remove and fit HVAC blower motor assemblies for select Volvo and Land Rover models to OEM 9997284 specifications. If you service Volvo or Land Rover cabins, this specialized tool speeds the removal...

DPTOOL Engine Timing Tool Kit is a purpose-built camshaft and crankshaft alignment set for GM/Opel/Vauxhall 1.0, 1.2 and 1.4 petrol engines (2009–2020), designed to lock engine timing components securely during service. This precision kit provides workshop-grade alignment pins and locking tools that make checking...

DPTOOL's fuel tank locking ring remover is a 1/2" square-drive wrench engineered to safely remove and install the fuel sender locking rings used on many VW, Audi and Porsche models. When replacing a fuel pump or servicing the sender flange, the locking ring can...

DPTOOL's 6-piece L-type diesel injector line socket wrench set is a compact mechanic's kit made to access, loosen and retighten diesel fuel injector fittings in tight engine bays. This set gathers six slotted L-shaped sockets in common injector sizes and packs them into a...

DPTOOL Engine Timing Tool Set is a complete, professional-grade kit designed to lock, align and service Fiat/Alfa/Jeep 1.4 Multiair engines precisely and repeatedly. If you work on Fiat, Alfa Romeo, Lancia, Dodge or Jeep vehicles equipped with the 1.4 Multiair family, this timing tool...

DPTOOL Power Steering Pump Pulley Puller Remove Install Tool is a complete, heat-treated steel kit for safely removing and installing power steering pump pulleys on many domestic and import vehicles. This pulley puller and installer set puts a professional-quality solution in your hands for...

DPTOOL's 10mm back tap thread chaser (M10x1.0) is a hardened repair tool designed to restore damaged spark plug threads without removing the cylinder head or leaving metal shavings in the combustion chamber. If a spark plug hole has been cross-threaded, stripped, or contaminated, this...

DPTOOL Engine Timing Tool kit is a 6-piece alignment and hold-down set designed to secure cam phasers, hold camshafts, and ease timing-chain tension on 3.6L Pentastar V6 engines from 2011–2019. This professional-grade kit is built to match factory service procedures for Chrysler, Jeep and...

DPTOOL Fuel Tank Lid Wrench is a 9-slot lock ring tool with a 1/2" square drive designed to safely remove and install fuel pump sender retaining rings on Toyota and Lexus models. This precision wrench is engineered to engage stubborn fuel pump lock rings...

DPTOOL's 7-piece low-profile oil filter socket set is a compact aluminum 6-point canister cap wrench kit designed to remove and install cartridge-style oil filter housings in tight engine bays. This set groups seven commonly used cap sizes into one compact kit so you can...

DPTOOL Fuel Injector Remove Tool is a slide-hammer puller designed to extract stuck fuel injectors from a wide range of BMW engines quickly and safely. If you need to remove stubborn fuel injectors from BMW engines such as N14, N18, N20, N26, N53, N54,...